Organisation placeholder image, no image found

Institute of Production Engineering and Machine Tools

Organisational unit: Institutes

Type of address: Visitor address.
An der Universität 2
30823
Garbsen
View graph of relations
1 - 20 out of 1,504Page size: 20

Publications

  1. 2025
  2. Published

    Effect of a Ti interlayer on TiN thin films grown on glass substrates as surrogates for PVD-coated natural rocks

    Petersen, H., Graf, D., Dias, N. F. L., Tillmann, W., Bergmann, B. & Breidenstein, B., 1 Dec 2025, In: Surface and Coatings Technology. 517, 132829.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Impact of different cryogenic cooling strategies on the surface integrity of roller bearing steels in hard turning

    Grossmann, F., Prasanthan, V., Albrecht, F., Denkena, B., Breidenstein, B., Maier, H. J., Barton, S. & Kirsch, B., Dec 2025, In: Production Engineering. 19, 6, p. 1293-1304 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  4. Published

    Impact of microstructure and heat treatment on chip formation of Ti-5553 processed by laser powder bed fusion

    Denkena, B., Hufenbach, J. K., Bergmann, B., Kühn, U., Kaban, V., Schenzel, J., Worpenberg, S. & Kunz, C., Dec 2025, In: Production Engineering. 19, 6, p. 1163-1175 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Similarity-based anomaly detection method for turning of multi-material workpieces with varying axially constant blank diameter

    Denkena, B., Bergmann, B., Buhl, H. & Handrup, M., Dec 2025, In: CIRP Journal of Manufacturing Science and Technology. 63, p. 205-213 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  6. Published

    Thermal sensitivity of fiber optic Rayleigh sensors embedded in the consolidation roller for future application in the process monitoring of Automated Fiber Placement

    Denkena, B., Schmidt, C., Kaczemirzk, M. & Schmitt, C., Dec 2025, In: Production Engineering. 19, 6, p. 1261-1270 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  7. Published

    Towards the development of textured polycrystalline La2NiO4+δ membranes and their oxygen-transporting properties

    Escobar Cano, G., Zhao, Z., Riebesehl, F., Stölting, O., Breidenstein, B. & Feldhoff, A., Dec 2025, In: Journal of Solid State Electrochemistry. 29, 12, p. 4997-5010 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  8. E-pub ahead of print

    Tribomechanical effects of cutting fluids in high-speed cutting

    Denkena, B., Poll, G., Bergmann, B., Pape, F., Nassef, B. & Schenzel, J., Feb 2026, In: Production Engineering. 20, 1.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    Deformation Effects in Magnetic Guides: Challenges and Solutions with Sensors

    Denkena, B., Buhl, H. & Zhang, J., 8 Nov 2025, In: Sensors. 25, 22, 6838.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    Biocompatible liquid-infused titanium minimizes oral biofilm adhesion in flow chamber and 3D implant-tissue-biofilm in vitro models

    Doll-Nikutta, K., Mikolai, C., Heine, N., Kurselis, K., Fadeeva, E., Debener, N., Legutko, B., Kreuzkamp, C., Prasanthan, V., Bahnemann, J., Chichkov, B. N. & Stiesch, M., Nov 2025, In: Bioactive Materials. 53, p. 706-717 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  11. Published

    Parameter optimisation of resistance welding and separation process of thermoplastic composite joints using carbon-fibre-reinforced low-melting poly(aryl ether ketone) (CF/LM-PAEK)

    Schäfer, H., Heimbs, S. & Schmidt, C., Nov 2025, In: Materials and design. 259, 114813.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    The influence of thermal effects on wear behaviour of TiAlN-coated cemented carbide tools during turning of AISI 1045+N

    Denkena, B., Bergmann, B., Petersen, H., Kraeft, M., Mohnfeld, N., Weißbrodt, V. K. J., Herbst, S. & Maier, H. J., 15 Oct 2025, In: WEAR. 580-581, 206289.

    Research output: Contribution to journal › Article › Research › peer review

  13. Published

    Residual stress engineering for highly loaded rolling-sliding contacts: Finding the sweet spot for maximum durability by hard turning and deep rolling

    Dechant, S., Nordmeyer, H., Pape, F., Breidenstein, B., Poll, G. & Marian, M., Oct 2025, In: Journal of Materials Processing Technology. 344, 119027.

    Research output: Contribution to journal › Article › Research › peer review

  14. Published

    Investigation of local tribological conditions in the secondary shear zone for dry and wet machining using a microscale simulation model

    Kim, M., Xie, Y., Schenzel, J. M., Kelley, J. C., Schneider, V., Dechant, S. C., Bergmann, B., Denkena, B., Poll, G. & Pape, F., 9 Sept 2025, In: Forschung im Ingenieurwesen/Engineering Research. 89, 1, 15 p., 00898-9.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Anomaly Detection Method for Hybrid Workpieces Using Dynamic Time Warping

    Denkena, B., Bergmann, B., Klemme, H. & Handrup, M., 25 Aug 2025, In: Advanced engineering materials. 27, 6, 8 p., 2401388.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Production and Forming of Deposition-Welded Hybrid Multimaterial Shafts

    Merkel, P., Budde, L., Biester, K., Faqiri, Y., Prasanthan, V., Herrmann, P., Kriwall, M., Schwarz, N., Hermsdorf, J., Stonis, M., Breidenstein, B., Hassel, T., Overmeyer, L. & Behrens, B. A., 25 Aug 2025, In: Advanced engineering materials. 27, 16, 2401391.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Interoperable Energiedatenbereitstellung mittels Verwaltungsschale

    Denkena, B., Heide, K. M. & Böttcher, A., 20 Aug 2025, In: ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb. 120, 7-8, p. 496-500 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Towards a Cyber-Physical Production System With Digital Workpiece Twin for Automated Turbine Blade Repair

    Denkena, B., Westermann, H. H. & Friebe, S., 11 Aug 2025, Structures and Dynamics: Bearing and Seal Dynamics; Emerging Methods in Engineering Design, Analysis and Additive Manufacturing; Fatigue, Fracture and Life Prediction; Probabilistic Methods; Rotordynamics. American Society of Mechanical Engineers (ASME), V008T23A007. (Proceedings of the ASME Turbo Expo; vol. 8).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  19. Published

    Influence of Coating Interlayer and Substrate on Tool Wear Progression when Turning C45

    Kalscheuer, C., Bobzin, K., Liu, X., Bergmann, B., Heckemeyer, A. & Junge, N., 22 Jul 2025, Lecture Notes in Production Engineering. Springer Nature, p. 11-20 10 p. (Production at the Leading Edge of Technology; vol. Part F679).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  20. Published

    Influence of Surface Treatments and Adhesive Type on Bond Strength Between Stainless Steel and CFRP in Agricultural Machinery

    Steuernagel, L., Schmidt, C. & Jenensch, C., 26 Jun 2025, In: MATERIALS. 18, 13, 3027.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Investigation of the local friction behavior in the secondary shear zone by coupling of chip formation and microscale contact simulation

    Kim, M., Schenzel, J., Pape, F., Bergmann, B., Denkena, B. & Poll, G., 1 Jun 2025, In: International Journal of Solids and Structures. 315, 9 p., 113367.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 3 4 5 6 7 8 ...76 Next