Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | 2019 IEEE Electrical Insulation Conference, EIC 2019 |
| Untertitel | Proceedings |
| Herausgeber (Verlag) | Institute of Electrical and Electronics Engineers Inc. |
| Seiten | 258-261 |
| Seitenumfang | 4 |
| ISBN (elektronisch) | 978-1-5386-7624-0 |
| ISBN (Print) | 978-1-5386-7625-7 |
| Publikationsstatus | Veröffentlicht - Juni 2019 |
| Veranstaltung | 2019 IEEE Electrical Insulation Conference, EIC 2019 - Calgary, Kanada Dauer: 16 Juni 2019 → 19 Juni 2019 |
Publikationsreihe
| Name | Electrical Insulation Conference and Electrical Manufacturing Expo |
|---|---|
| Band | 2019-June |
| ISSN (Print) | 2334-0975 |
| ISSN (elektronisch) | 2576-6791 |
Abstract
In this article, the natural convection heat transfer of Fe304/oil and graphene/oil nanofluids and mineral oil inside a 200 kVA distribution transformer is numerically studied. The Fe304/oil and graphene/oil nanofluids were simulated as a mixture two-phase flow where mineral oil was modeled as a single-phase flow with the temperature dependent thermophysical properties. Based on the simulation results, the nanoparticles when dispersed in oil enhance the convective heat transfer of oil and decrease its hotspot temperature. So that, the hotspot temperature of the Fe304/oil and graphene/oil were respectively 1 °C and 4.5 °C lower than that of the mineral oil. In addition, the transformer filled with graphene/oil nanofluid experienced considerably lower temperature in the thermally critical region. According to the obtained results, employing the nanofluid improves the cooling performance of the transformer, which leads to a more reliable operation and longer life.
ASJC Scopus Sachgebiete
- Energie (insg.)
- Energieanlagenbau und Kraftwerkstechnik
- Werkstoffwissenschaften (insg.)
- Keramische und Verbundwerkstoffe
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
- Werkstoffwissenschaften (insg.)
- Oberflächen, Beschichtungen und Folien
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
2019 IEEE Electrical Insulation Conference, EIC 2019: Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. S. 258-261 9046609 (Electrical Insulation Conference and Electrical Manufacturing Expo; Band 2019-June).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Simulation of nanofluid as a two-phase flow in a distribution transformer
AU - Raeisian, Leyla
AU - Werle, Peter
AU - Niazmand, Hamid
PY - 2019/6
Y1 - 2019/6
N2 - In this article, the natural convection heat transfer of Fe304/oil and graphene/oil nanofluids and mineral oil inside a 200 kVA distribution transformer is numerically studied. The Fe304/oil and graphene/oil nanofluids were simulated as a mixture two-phase flow where mineral oil was modeled as a single-phase flow with the temperature dependent thermophysical properties. Based on the simulation results, the nanoparticles when dispersed in oil enhance the convective heat transfer of oil and decrease its hotspot temperature. So that, the hotspot temperature of the Fe304/oil and graphene/oil were respectively 1 °C and 4.5 °C lower than that of the mineral oil. In addition, the transformer filled with graphene/oil nanofluid experienced considerably lower temperature in the thermally critical region. According to the obtained results, employing the nanofluid improves the cooling performance of the transformer, which leads to a more reliable operation and longer life.
AB - In this article, the natural convection heat transfer of Fe304/oil and graphene/oil nanofluids and mineral oil inside a 200 kVA distribution transformer is numerically studied. The Fe304/oil and graphene/oil nanofluids were simulated as a mixture two-phase flow where mineral oil was modeled as a single-phase flow with the temperature dependent thermophysical properties. Based on the simulation results, the nanoparticles when dispersed in oil enhance the convective heat transfer of oil and decrease its hotspot temperature. So that, the hotspot temperature of the Fe304/oil and graphene/oil were respectively 1 °C and 4.5 °C lower than that of the mineral oil. In addition, the transformer filled with graphene/oil nanofluid experienced considerably lower temperature in the thermally critical region. According to the obtained results, employing the nanofluid improves the cooling performance of the transformer, which leads to a more reliable operation and longer life.
KW - mineral oil
KW - nanofluid
KW - natural convection
KW - transformer
UR - http://www.scopus.com/inward/record.url?scp=85083502219&partnerID=8YFLogxK
U2 - 10.1109/EIC43217.2019.9046609
DO - 10.1109/EIC43217.2019.9046609
M3 - Conference contribution
AN - SCOPUS:85083502219
SN - 978-1-5386-7625-7
T3 - Electrical Insulation Conference and Electrical Manufacturing Expo
SP - 258
EP - 261
BT - 2019 IEEE Electrical Insulation Conference, EIC 2019
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2019 IEEE Electrical Insulation Conference, EIC 2019
Y2 - 16 June 2019 through 19 June 2019
ER -