21 - 40 out of 350Page size: 20
  1. 2023
  2. Published

    Combined influence of cooling strategies and depth of cut on the deformation-induced martensitic transformation turning AISI 304

    Fricke, L. V., Basten, S., Nguyen, H. N., Breidenstein, B., Kirsch, B., Aurich, J. C., Zaremba, D., Maier, H. J. & Barton, S., Mar 2023, In: Journal of Materials Processing Technology. 312, 117861.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Detection of joining mechanisms at different locations of the wire/substrate interface during ultrasonic wire bonding via a PZT-based sensor array

    Long, Y., Arndt, M., Sun, C., Dencker, F., Wurz, M. & Twiefel, J., Mar 2023, In: Journal of Materials Processing Technology. 312, 117826.

    Research output: Contribution to journal › Article › Research › peer review

  4. Published

    Representative structural element approach for assessing the mechanical properties of automated fibre placement-induced defects

    Friedel, A., Heimbs, S., Horst, P., Schmidt, C. & Timmermann, M., Mar 2023, In: Composites Part C: Open Access. 10, 100350.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Spray binder for automated preforming: Spray process and preform properties

    Möllers, H., Schmidt, C. & Meiners, D., 3 Jan 2023, In: Polymer composites. 44, 1, p. 432-443 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  6. 2022
  7. Published

    Numerical Simulation of Microcrack-Induced Delamination in Cross-Ply-Laminates under Static Loading using Cohesive Zone Models

    Hacker, G., Brod, M., Just, G., Scheffler, S. S., Koch, I., Rolfes, R. & Gude, M., 12 Dec 2022, Proceedings of the 20th European Conference on Composite Materials: Composites Meets Sustainability. Vassilopoulos, A. P. & Michaud, V. (eds.). Lausanne, Vol. Vol 4 - Modeling and Prediction. p. 334-341 8 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    On an orthotropic, elasto-plastic material model to simulate the crash of a FRP glider fuselage

    Rolffs, C., Scheffler, S. S. & Rolfes, R., 12 Dec 2022, Proceedings of the 20th European Conference on Composite Materials: Volume_D_Modeling and prediction. Vassilopoulos, A. P. & Michaud, V. (eds.). Lausanne, p. 1-8 8 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  9. Published

    Electrospun Ca3 Co4−xO9+δ nanofibers and nanoribbons: Microstructure and thermoelectric properties

    Kruppa, K., Maor, I. I., Steinbach, F., Beilin, V., Mann-Lahav, M., Wolf, M., Grader, G. S. & Feldhoff, A., 8 Dec 2022, In: Journal of the American Ceramic Society. 106, 2, p. 1170-1181 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    The effect of model dimensionality on compression strength of fiber reinforced composites

    Safdar, N., Daum, B. & Rolfes, R., Dec 2022, In: Journal of composite materials. 56, 30, p. 4645-4662 18 p.

    Research output: Contribution to journal › Article › Research › peer review

  11. Published

    Enhanced pseudoelasticity of an Fe-Mn-Si-based shape memory alloy by applying microstructural engineering through recrystallization and precipitation

    Khodaverdi, H., Mohri, M., Ghafoori, E., Ghorabaei, A. S. & Nili-Ahmadabadi, M., Nov 2022, In: Journal of Materials Research and Technology. 21, p. 2999-3013 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    Ultrahigh strength and negative thermal expansion and low thermal conductivity in graphyne nanosheets confirmed by machine-learning interatomic potentials

    Mortazavi, B. & Zhuang, X., Nov 2022, In: FlatChem. 36, 100446.

    Research output: Contribution to journal › Article › Research › peer review

  13. Published

    Investigations on the multistability of series-connected unsymmetric laminates

    Kumar, A. P., Anilkumar, P. M., Haldar, A., Scheffler, S., Dorn, O., Rao, B. N. & Rolfes, R., 20 Oct 2022, In: Composites science and technology. 229, 109635.

    Research output: Contribution to journal › Article › Research › peer review

  14. Published

    Determination of as-built properties of fiber reinforced polymers in a wind turbine blade using scanning electron and high-resolution X-ray microscopy

    Rosemeier, M., Lester, C., Antoniou, A., Fahrenson, C., Manousides, N. & Balzani, C., Oct 2022, In: Composites Part C: Open Access. 9, p. 1-12 12 p., 100310.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Impact of surface texture on ultrasonic wire bonding process

    Long, Y., Arndt, M., Dencker, F., Wurz, M., Twiefel, J. & Wallaschek, J., Sept 2022, In: Journal of Materials Research and Technology. 20, p. 1828-1838 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Shape recovery performance of a (V, C)-containing Fe-Mn-Si-Ni-Cr shape memory alloy fabricated by laser powder bed fusion

    Ferretto, I., Kim, D., Mohri, M., Ghafoori, E., Lee, W. J. & Leinenbach, C., Sept 2022, In: Journal of Materials Research and Technology. 20, p. 3969-3984 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Stochastic integrated machine learning based multiscale approach for the prediction of the thermal conductivity in carbon nanotube reinforced polymeric composites

    Liu, B., Vu-Bac, N., Zhuang, X., Fu, X. & Rabczuk, T., 16 Jun 2022, In: Composites science and technology. 224, 109425.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Morphing of bistable variable stiffness composites using distributed MFC actuators

    Anilkumar, P. M., Haldar, A., Scheffler, S., Jansen, E. L., Rao, B. N. & Rolfes, R., 1 Jun 2022, In: Composite structures. 289, 115396.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Stochastic full-range multiscale modeling of thermal conductivity of Polymeric carbon nanotubes composites: A machine learning approach

    Liu, B., Vu-Bac, N., Fu, X., Zhuang, X. & Rabczuk, T., 1 Jun 2022, In: Composite structures. 289, 1 p., 115393.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    A double-phase field model for multiple failures in composites

    Zhang, P., Tan, S., Hu, X., Yao, W. & Zhuang, X., 18 May 2022, In: Composite structures. 293, 115730.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    High-flux CO2-stable oxygen transport hollow fiber membranes through surface engineering

    Buck, F., Bunjaku, O., Caro, J. & Schiestel, T., Apr 2022, In: Journal of the European Ceramic Society. 42, 4, p. 1537-1547 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  22. Published

    A numerical investigation of the statistical size effect in non-crimp fabric laminates under homogeneous compressive loads

    Daum, B., Gottlieb, G., Safdar, N., Brod, M., Ohlendorf, J. H. & Rolfes, R., 1 Mar 2022, In: Journal of composite materials. 56, 5, p. 665-683 19 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 3 4 5 6 7 8 ...18 Next