Large-scale spatiotemporal calculation of photovoltaic capacity factors using ray tracing: A case study in urban environments

Research output: Contribution to journalArticleResearchpeer review

Authors

  • Dennis Bredemeier
  • Carsten Schinke
  • Raphael Niepelt
  • Rolf Brendel

Research Organisations

External Research Organisations

  • Institute for Solar Energy Research (ISFH)
View graph of relations

Details

Original languageEnglish
Pages (from-to)232-243
Number of pages12
JournalProgress in Photovoltaics: Research and Applications
Volume32
Issue number4
Publication statusPublished - 11 Mar 2024

Abstract

Photovoltaics (PVs) on building facades, either building-integrated or building-attached, offer a large energy yield potential especially in densely populated urban areas. Targeting this potential requires the availability of planning tools such as insolation forecasts. However, calculating the PV potential of facade surfaces in an urban environment is challenging. Complex time-dependent shadowing and light reflections must be considered. In this contribution, we present fast ray tracing calculations for insolation forecasts in large urban environments using clustering of Sun positions into typical days. We use our approach to determine time resolved PV capacity factors for rooftops and facades in a wide variety of environments, which is particularly useful for energy system analyses. The advantage of our approach is that the determined capacity factors for one geographic location can be easily extended to larger geographic regions. In this contribution, we perform calculations in three exemplary environments and extend the results globally. Especially for facade surfaces, we find that there is a pronounced intra-day and also seasonal distribution of PV potentials that strongly depends on the degree of latitude. The consideration of light reflections in our ray tracing approach causes an increase in calculated full load hours for facade surfaces between 10% and 25% for most geographical locations.

Keywords

    energy system analysis, facades, photovoltaic, ray tracing, urban environment

ASJC Scopus subject areas

Sustainable Development Goals

Cite this

Large-scale spatiotemporal calculation of photovoltaic capacity factors using ray tracing: A case study in urban environments. / Bredemeier, Dennis; Schinke, Carsten; Niepelt, Raphael et al.
In: Progress in Photovoltaics: Research and Applications, Vol. 32, No. 4, 11.03.2024, p. 232-243.

Research output: Contribution to journalArticleResearchpeer review

Download
@article{9243e0e9994f432e916499b7aefdb378,
title = "Large-scale spatiotemporal calculation of photovoltaic capacity factors using ray tracing: A case study in urban environments",
abstract = "Photovoltaics (PVs) on building facades, either building-integrated or building-attached, offer a large energy yield potential especially in densely populated urban areas. Targeting this potential requires the availability of planning tools such as insolation forecasts. However, calculating the PV potential of facade surfaces in an urban environment is challenging. Complex time-dependent shadowing and light reflections must be considered. In this contribution, we present fast ray tracing calculations for insolation forecasts in large urban environments using clustering of Sun positions into typical days. We use our approach to determine time resolved PV capacity factors for rooftops and facades in a wide variety of environments, which is particularly useful for energy system analyses. The advantage of our approach is that the determined capacity factors for one geographic location can be easily extended to larger geographic regions. In this contribution, we perform calculations in three exemplary environments and extend the results globally. Especially for facade surfaces, we find that there is a pronounced intra-day and also seasonal distribution of PV potentials that strongly depends on the degree of latitude. The consideration of light reflections in our ray tracing approach causes an increase in calculated full load hours for facade surfaces between 10% and 25% for most geographical locations.",
keywords = "energy system analysis, facades, photovoltaic, ray tracing, urban environment",
author = "Dennis Bredemeier and Carsten Schinke and Raphael Niepelt and Rolf Brendel",
note = "Funding Information: The authors acknowledge the financial support by the Ministry of Science and Culture of Lower Saxony under Grant No. 74ZN1596 and by the Federal Ministry of Education and Research of Germany in the framework of HyNEAT under Grant No. 03SF0670A. The results contain modified Copernicus Climate Change Service information 2022. Neither the European Commission nor ECMWF is responsible for any use that may be made of the Copernicus information or data it contains. ",
year = "2024",
month = mar,
day = "11",
doi = "10.1002/pip.3756",
language = "English",
volume = "32",
pages = "232--243",
journal = "Progress in Photovoltaics: Research and Applications",
issn = "1062-7995",
publisher = "John Wiley and Sons Ltd",
number = "4",

}

Download

TY - JOUR

T1 - Large-scale spatiotemporal calculation of photovoltaic capacity factors using ray tracing: A case study in urban environments

AU - Bredemeier, Dennis

AU - Schinke, Carsten

AU - Niepelt, Raphael

AU - Brendel, Rolf

N1 - Funding Information: The authors acknowledge the financial support by the Ministry of Science and Culture of Lower Saxony under Grant No. 74ZN1596 and by the Federal Ministry of Education and Research of Germany in the framework of HyNEAT under Grant No. 03SF0670A. The results contain modified Copernicus Climate Change Service information 2022. Neither the European Commission nor ECMWF is responsible for any use that may be made of the Copernicus information or data it contains.

PY - 2024/3/11

Y1 - 2024/3/11

N2 - Photovoltaics (PVs) on building facades, either building-integrated or building-attached, offer a large energy yield potential especially in densely populated urban areas. Targeting this potential requires the availability of planning tools such as insolation forecasts. However, calculating the PV potential of facade surfaces in an urban environment is challenging. Complex time-dependent shadowing and light reflections must be considered. In this contribution, we present fast ray tracing calculations for insolation forecasts in large urban environments using clustering of Sun positions into typical days. We use our approach to determine time resolved PV capacity factors for rooftops and facades in a wide variety of environments, which is particularly useful for energy system analyses. The advantage of our approach is that the determined capacity factors for one geographic location can be easily extended to larger geographic regions. In this contribution, we perform calculations in three exemplary environments and extend the results globally. Especially for facade surfaces, we find that there is a pronounced intra-day and also seasonal distribution of PV potentials that strongly depends on the degree of latitude. The consideration of light reflections in our ray tracing approach causes an increase in calculated full load hours for facade surfaces between 10% and 25% for most geographical locations.

AB - Photovoltaics (PVs) on building facades, either building-integrated or building-attached, offer a large energy yield potential especially in densely populated urban areas. Targeting this potential requires the availability of planning tools such as insolation forecasts. However, calculating the PV potential of facade surfaces in an urban environment is challenging. Complex time-dependent shadowing and light reflections must be considered. In this contribution, we present fast ray tracing calculations for insolation forecasts in large urban environments using clustering of Sun positions into typical days. We use our approach to determine time resolved PV capacity factors for rooftops and facades in a wide variety of environments, which is particularly useful for energy system analyses. The advantage of our approach is that the determined capacity factors for one geographic location can be easily extended to larger geographic regions. In this contribution, we perform calculations in three exemplary environments and extend the results globally. Especially for facade surfaces, we find that there is a pronounced intra-day and also seasonal distribution of PV potentials that strongly depends on the degree of latitude. The consideration of light reflections in our ray tracing approach causes an increase in calculated full load hours for facade surfaces between 10% and 25% for most geographical locations.

KW - energy system analysis

KW - facades

KW - photovoltaic

KW - ray tracing

KW - urban environment

UR - http://www.scopus.com/inward/record.url?scp=85178234044&partnerID=8YFLogxK

U2 - 10.1002/pip.3756

DO - 10.1002/pip.3756

M3 - Article

AN - SCOPUS:85178234044

VL - 32

SP - 232

EP - 243

JO - Progress in Photovoltaics: Research and Applications

JF - Progress in Photovoltaics: Research and Applications

SN - 1062-7995

IS - 4

ER -