Details
| Original language | English |
|---|---|
| Article number | 110906 |
| Journal | Journal of Petroleum Science and Engineering |
| Volume | 218 |
| Early online date | 5 Aug 2022 |
| Publication status | Published - Nov 2022 |
Abstract
Horizontal well with multi-stage fracturing is one of the most effective stimulation methods for unconventional reservoirs, e.g. tight oil/gas or shale. To maximize reservoir stimulation volume (SRV), tighter fracture spacing and fewer perforations are distributed in one stage during extreme limited-entry fracturing (XLEF) in recent years. However, the fracture geometries and injection pressure curve are not clear when multiple fractures with close spacing were created simultaneously in the perforated wellbore during XLEF. This study investigated the multiple fracture simultaneous propagation in the XLEF perforated wellbore based on the true tri-axial fracturing experiments. Critical factors of horizontal stress difference (HSD), the number of perforation clusters, helical/in-plane perforated method, number of perforations per cluster and fracturing fluid flowrate were investigated in detail. The results showed that, firstly, compared to one fracture produced by the helical perforated method, XLEF with the in-plane perforated method has a higher breakdown pressure and could simultaneously create multiple transverse fractures. Secondly, longitudinal fractures and a small number of curved transverse fractures occurred simultaneously under lower HSD conditions, while multiple parallel transverse fractures could be created under high HSD conditions. Thirdly, increasing the number of perforations per cluster will reduce perforation cluster effectiveness, and increasing the number of clusters will lead to the merging of multiple fractures. Finally, three relationships between pressure response and fracture geometries during XLEF, e.g. single transverse fracture, multiple transverse fractures, co-existence of longitudinal and transverse fractures, have been revealed. This study provides a meaningful perspective for the multiple fracture propagation in the perforated wellbore, which could help the field fracturing design during XLEF.
Keywords
- Extremely limited entry fracturing (XLEF), Injection pressure response, Multiple fracture propagation, Perforated wellbore, Tri-axial fracturing experiment
ASJC Scopus subject areas
- Energy(all)
- Fuel Technology
- Earth and Planetary Sciences(all)
- Geotechnical Engineering and Engineering Geology
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Journal of Petroleum Science and Engineering, Vol. 218, 110906, 11.2022.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Experimental study on the multiple fracture simultaneous propagation during extremely limited-entry fracturing
AU - Li, Minghui
AU - Zhou, Fujian
AU - Dong, Enjia
AU - Zhang, Guchang
AU - Zhuang, Xiaoying
AU - Wang, Bo
N1 - Funding Information: This work was supported by the National Natural Science Foundation of China (No. 52174045 , No. 52104011 ). Research Foundation of China University of Petroleum-Beijing at Karamay (No. XQZX20210001 ), Natural Science Foundation of Xinjiang Uygur Autonomous Region ( 2022D01B80 ).
PY - 2022/11
Y1 - 2022/11
N2 - Horizontal well with multi-stage fracturing is one of the most effective stimulation methods for unconventional reservoirs, e.g. tight oil/gas or shale. To maximize reservoir stimulation volume (SRV), tighter fracture spacing and fewer perforations are distributed in one stage during extreme limited-entry fracturing (XLEF) in recent years. However, the fracture geometries and injection pressure curve are not clear when multiple fractures with close spacing were created simultaneously in the perforated wellbore during XLEF. This study investigated the multiple fracture simultaneous propagation in the XLEF perforated wellbore based on the true tri-axial fracturing experiments. Critical factors of horizontal stress difference (HSD), the number of perforation clusters, helical/in-plane perforated method, number of perforations per cluster and fracturing fluid flowrate were investigated in detail. The results showed that, firstly, compared to one fracture produced by the helical perforated method, XLEF with the in-plane perforated method has a higher breakdown pressure and could simultaneously create multiple transverse fractures. Secondly, longitudinal fractures and a small number of curved transverse fractures occurred simultaneously under lower HSD conditions, while multiple parallel transverse fractures could be created under high HSD conditions. Thirdly, increasing the number of perforations per cluster will reduce perforation cluster effectiveness, and increasing the number of clusters will lead to the merging of multiple fractures. Finally, three relationships between pressure response and fracture geometries during XLEF, e.g. single transverse fracture, multiple transverse fractures, co-existence of longitudinal and transverse fractures, have been revealed. This study provides a meaningful perspective for the multiple fracture propagation in the perforated wellbore, which could help the field fracturing design during XLEF.
AB - Horizontal well with multi-stage fracturing is one of the most effective stimulation methods for unconventional reservoirs, e.g. tight oil/gas or shale. To maximize reservoir stimulation volume (SRV), tighter fracture spacing and fewer perforations are distributed in one stage during extreme limited-entry fracturing (XLEF) in recent years. However, the fracture geometries and injection pressure curve are not clear when multiple fractures with close spacing were created simultaneously in the perforated wellbore during XLEF. This study investigated the multiple fracture simultaneous propagation in the XLEF perforated wellbore based on the true tri-axial fracturing experiments. Critical factors of horizontal stress difference (HSD), the number of perforation clusters, helical/in-plane perforated method, number of perforations per cluster and fracturing fluid flowrate were investigated in detail. The results showed that, firstly, compared to one fracture produced by the helical perforated method, XLEF with the in-plane perforated method has a higher breakdown pressure and could simultaneously create multiple transverse fractures. Secondly, longitudinal fractures and a small number of curved transverse fractures occurred simultaneously under lower HSD conditions, while multiple parallel transverse fractures could be created under high HSD conditions. Thirdly, increasing the number of perforations per cluster will reduce perforation cluster effectiveness, and increasing the number of clusters will lead to the merging of multiple fractures. Finally, three relationships between pressure response and fracture geometries during XLEF, e.g. single transverse fracture, multiple transverse fractures, co-existence of longitudinal and transverse fractures, have been revealed. This study provides a meaningful perspective for the multiple fracture propagation in the perforated wellbore, which could help the field fracturing design during XLEF.
KW - Extremely limited entry fracturing (XLEF)
KW - Injection pressure response
KW - Multiple fracture propagation
KW - Perforated wellbore
KW - Tri-axial fracturing experiment
UR - http://www.scopus.com/inward/record.url?scp=85138829387&partnerID=8YFLogxK
U2 - 10.1016/j.petrol.2022.110906
DO - 10.1016/j.petrol.2022.110906
M3 - Article
AN - SCOPUS:85138829387
VL - 218
JO - Journal of Petroleum Science and Engineering
JF - Journal of Petroleum Science and Engineering
SN - 0920-4105
M1 - 110906
ER -