Details
| Original language | English |
|---|---|
| Article number | 117667 |
| Number of pages | 13 |
| Journal | Engineering structures |
| Volume | 304 |
| Early online date | 17 Feb 2024 |
| Publication status | Published - 1 Apr 2024 |
Abstract
The topographic amplification effect has significant impacts on structural safety since it causes inconsistencies in seismic response. Previous studies on topographical influence focus on a certain point and cross-sections, which is insufficient to comprehensively understand the topographic amplification effect. Besides, few studies analyze the relationship between seismic response and ground motion frequency. Hence, this study aims to investigate the effects of topographic irregularity of the whole site, and explore the relationship between seismic response characteristics and signal frequency. An analysis procedure for modeling and meshing an actual 3D site is proposed by combining SolidWorks, SketchUp and Abaqus. Finite element method (FEM) is applied to simulate the seismic response. Results show that the site amplification and de-amplification are associated with topographic features. Specifically, the seismic responses of ravine and ridge areas could differ by a factor of two. However, acceleration response in ravine areas shows unusual amplification under input signal frequencies over 4 Hz. Besides, the frequency of input ground motion certainly affects the seismic site amplification. Specifically, in this study, the seismic response peaks when the input frequency is in the range of 0.4–0.8 Hz, which corresponds to the resonance frequency of the numerical model. In terms of frequency, site amplification showed a correlation between actual recordings and artificial signal inputs, but lower intensities are observed when actual records are input. Therefore, the engineering risk will be underestimated when the topographic irregularity and frequency characteristic of input ground motion are inappropriately considered. The findings of this study provide a new approach to investigate the actual 3D site amplification effects and shed new insight on regional seismic risk analysis.
Keywords
- Frequency, Ground motion, Seismic response, Site amplification, Topographic irregularity
ASJC Scopus subject areas
- Engineering(all)
- Civil and Structural Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Engineering structures, Vol. 304, 117667, 01.04.2024.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Effects of topographic irregularity on seismic site amplification considering input signal frequency
T2 - A case study
AU - Chen, Zhe Xing
AU - Chen, Guan
AU - Liu, Yong
N1 - Funding Information: This research is supported by the National Natural Science Foundation of China (Grant No. U22A20596 ) and the Natural Science Foundation Innovation Group Project of Hubei Province, China (Grant No. 2023AFA017 ). Guan Chen would like to thank the financial support of Sino-German (CSC-DAAD) Postdoc Scholarship Program .
PY - 2024/4/1
Y1 - 2024/4/1
N2 - The topographic amplification effect has significant impacts on structural safety since it causes inconsistencies in seismic response. Previous studies on topographical influence focus on a certain point and cross-sections, which is insufficient to comprehensively understand the topographic amplification effect. Besides, few studies analyze the relationship between seismic response and ground motion frequency. Hence, this study aims to investigate the effects of topographic irregularity of the whole site, and explore the relationship between seismic response characteristics and signal frequency. An analysis procedure for modeling and meshing an actual 3D site is proposed by combining SolidWorks, SketchUp and Abaqus. Finite element method (FEM) is applied to simulate the seismic response. Results show that the site amplification and de-amplification are associated with topographic features. Specifically, the seismic responses of ravine and ridge areas could differ by a factor of two. However, acceleration response in ravine areas shows unusual amplification under input signal frequencies over 4 Hz. Besides, the frequency of input ground motion certainly affects the seismic site amplification. Specifically, in this study, the seismic response peaks when the input frequency is in the range of 0.4–0.8 Hz, which corresponds to the resonance frequency of the numerical model. In terms of frequency, site amplification showed a correlation between actual recordings and artificial signal inputs, but lower intensities are observed when actual records are input. Therefore, the engineering risk will be underestimated when the topographic irregularity and frequency characteristic of input ground motion are inappropriately considered. The findings of this study provide a new approach to investigate the actual 3D site amplification effects and shed new insight on regional seismic risk analysis.
AB - The topographic amplification effect has significant impacts on structural safety since it causes inconsistencies in seismic response. Previous studies on topographical influence focus on a certain point and cross-sections, which is insufficient to comprehensively understand the topographic amplification effect. Besides, few studies analyze the relationship between seismic response and ground motion frequency. Hence, this study aims to investigate the effects of topographic irregularity of the whole site, and explore the relationship between seismic response characteristics and signal frequency. An analysis procedure for modeling and meshing an actual 3D site is proposed by combining SolidWorks, SketchUp and Abaqus. Finite element method (FEM) is applied to simulate the seismic response. Results show that the site amplification and de-amplification are associated with topographic features. Specifically, the seismic responses of ravine and ridge areas could differ by a factor of two. However, acceleration response in ravine areas shows unusual amplification under input signal frequencies over 4 Hz. Besides, the frequency of input ground motion certainly affects the seismic site amplification. Specifically, in this study, the seismic response peaks when the input frequency is in the range of 0.4–0.8 Hz, which corresponds to the resonance frequency of the numerical model. In terms of frequency, site amplification showed a correlation between actual recordings and artificial signal inputs, but lower intensities are observed when actual records are input. Therefore, the engineering risk will be underestimated when the topographic irregularity and frequency characteristic of input ground motion are inappropriately considered. The findings of this study provide a new approach to investigate the actual 3D site amplification effects and shed new insight on regional seismic risk analysis.
KW - Frequency
KW - Ground motion
KW - Seismic response
KW - Site amplification
KW - Topographic irregularity
UR - http://www.scopus.com/inward/record.url?scp=85185395767&partnerID=8YFLogxK
U2 - 10.1016/j.engstruct.2024.117667
DO - 10.1016/j.engstruct.2024.117667
M3 - Article
AN - SCOPUS:85185395767
VL - 304
JO - Engineering structures
JF - Engineering structures
SN - 0141-0296
M1 - 117667
ER -