Details
Original language | English |
---|---|
Title of host publication | Material Forming, ESAFORM 2024 |
Editors | Anna Carla Araujo, Arthur Cantarel, France Chabert, Adrian Korycki, Philippe Olivier, Fabrice Schmidt |
Pages | 842-850 |
Number of pages | 9 |
Publication status | Published - 2024 |
Event | 27th International ESAFORM Conference on Material Forming, ESAFORM 2024 - Toulouse, France Duration: 24 Apr 2024 → 26 Apr 2024 |
Publication series
Name | Materials Research Proceedings |
---|---|
Volume | 41 |
ISSN (Print) | 2474-3941 |
ISSN (electronic) | 2474-395X |
Abstract
The phase transformation of metastable austenitic steels caused by externally superimposed strains during cold forming increases the material strength in addition to strain hardening. Although numerous research papers have described the basic effects of the phase transformation from metastable austenite to martensite, it is not yet applied in the dimensions of common bulk formed components. Thereby the functionalisation of deformation-induced martensite to increase the material strength specifically at heavily loaded surfaces bears potential. However, the amount of deformation-induced martensite formation within a forming process is limited through the occurring strain hardening. In this paper an approach for an advanced functionalisation of this transformation through an adaption of the process is presented. The setup of a forming process is adapted, forming experiments are carried out at low temperatures and the specimens are investigated through hardness measurements (HV1), magnetic inductive testing (Feritscope MP3C) and microstructure analysis. The results were compared to distributions of plastic strain determined through FE simulations and showed a good correlation. It can be shown, that at cryogenic temperatures a significant increase of martensite formation is achieved.
Keywords
- Bulk Metal Forming, Cryogenic Forming, Local Martensite Formation, Phase Transformation
ASJC Scopus subject areas
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
Material Forming, ESAFORM 2024. ed. / Anna Carla Araujo; Arthur Cantarel; France Chabert; Adrian Korycki; Philippe Olivier; Fabrice Schmidt. 2024. p. 842-850 (Materials Research Proceedings; Vol. 41).
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - Advanced functionalisation and numerical simulation of the boundary layer by deformation-induced martensite on bearing rings through bulk metal forming
AU - Peddinghaus, Simon
AU - Till, Michael
AU - Wester, Hendrik
AU - Peddinghaus, Julius
AU - Brunotte, Kai
AU - Behrens, Bernd Arno
N1 - Publisher Copyright: © 2024, Association of American Publishers. All rights reserved.
PY - 2024
Y1 - 2024
N2 - The phase transformation of metastable austenitic steels caused by externally superimposed strains during cold forming increases the material strength in addition to strain hardening. Although numerous research papers have described the basic effects of the phase transformation from metastable austenite to martensite, it is not yet applied in the dimensions of common bulk formed components. Thereby the functionalisation of deformation-induced martensite to increase the material strength specifically at heavily loaded surfaces bears potential. However, the amount of deformation-induced martensite formation within a forming process is limited through the occurring strain hardening. In this paper an approach for an advanced functionalisation of this transformation through an adaption of the process is presented. The setup of a forming process is adapted, forming experiments are carried out at low temperatures and the specimens are investigated through hardness measurements (HV1), magnetic inductive testing (Feritscope MP3C) and microstructure analysis. The results were compared to distributions of plastic strain determined through FE simulations and showed a good correlation. It can be shown, that at cryogenic temperatures a significant increase of martensite formation is achieved.
AB - The phase transformation of metastable austenitic steels caused by externally superimposed strains during cold forming increases the material strength in addition to strain hardening. Although numerous research papers have described the basic effects of the phase transformation from metastable austenite to martensite, it is not yet applied in the dimensions of common bulk formed components. Thereby the functionalisation of deformation-induced martensite to increase the material strength specifically at heavily loaded surfaces bears potential. However, the amount of deformation-induced martensite formation within a forming process is limited through the occurring strain hardening. In this paper an approach for an advanced functionalisation of this transformation through an adaption of the process is presented. The setup of a forming process is adapted, forming experiments are carried out at low temperatures and the specimens are investigated through hardness measurements (HV1), magnetic inductive testing (Feritscope MP3C) and microstructure analysis. The results were compared to distributions of plastic strain determined through FE simulations and showed a good correlation. It can be shown, that at cryogenic temperatures a significant increase of martensite formation is achieved.
KW - Bulk Metal Forming
KW - Cryogenic Forming
KW - Local Martensite Formation
KW - Phase Transformation
UR - http://www.scopus.com/inward/record.url?scp=85195893814&partnerID=8YFLogxK
U2 - 10.21741/9781644903131-92
DO - 10.21741/9781644903131-92
M3 - Conference contribution
AN - SCOPUS:85195893814
SN - 9781644903131
T3 - Materials Research Proceedings
SP - 842
EP - 850
BT - Material Forming, ESAFORM 2024
A2 - Araujo, Anna Carla
A2 - Cantarel, Arthur
A2 - Chabert, France
A2 - Korycki, Adrian
A2 - Olivier, Philippe
A2 - Schmidt, Fabrice
T2 - 27th International ESAFORM Conference on Material Forming, ESAFORM 2024
Y2 - 24 April 2024 through 26 April 2024
ER -