Numerical simulation of pile installations in a hypoplastic framework using an SPH based method

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

Organisationseinheiten

Externe Organisationen

  • Technische Universität Braunschweig
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Aufsatznummer104006
FachzeitschriftComputers and Geotechnics
Jahrgang133
Frühes Online-Datum21 Feb. 2021
PublikationsstatusVeröffentlicht - Mai 2021

Abstract

This paper presents a tool to estimate the stresses, and thus the expected forces, at a retaining wall by the installation of piles. The solution method is based on Smoothed Particle Hydrodynamics (SPH) and the soil is modeled using a simplified hypoplastic material law. In order to correctly compute the forces on the soil due to the contact between the pile and the soil, a formulation for imposing frictional boundary conditions using SPH is developed. Modeling the soil with the chosen hypoplastic approach also allows for tensile forces in the soil. However, these are not physical. Therefore, an alternative formulation is presented which directly eliminates unphysical tensile stresses in the cohesionless soil without any additional numerical parameters. The numerical code is firstly validated against benchmark problems. Then several test cases are simulated including monotonic and cyclic penetration of piles into the soil. A good agreement with the experimental observation is found. Additionally, the impact of pile driving in the presence of sheetpiles (retainers) is investigated to see how the pile driving can alter the applied forces on the sheet piles. The simulation of such complex geotechnical problems that involve large deformation, material nonlinearity, and moving boundary conditions demonstrates the applicability and versatility of the proposed numerical tool in this field.

ASJC Scopus Sachgebiete

Zitieren

Numerical simulation of pile installations in a hypoplastic framework using an SPH based method. / Soleimani, Meisam; Weißenfels, Christian.
in: Computers and Geotechnics, Jahrgang 133, 104006, 05.2021.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Soleimani M, Weißenfels C. Numerical simulation of pile installations in a hypoplastic framework using an SPH based method. Computers and Geotechnics. 2021 Mai;133:104006. Epub 2021 Feb 21. doi: 10.1016/j.compgeo.2021.104006
Download
@article{7aa3594a29e84bf690a64b90e5e95cfd,
title = "Numerical simulation of pile installations in a hypoplastic framework using an SPH based method",
abstract = "This paper presents a tool to estimate the stresses, and thus the expected forces, at a retaining wall by the installation of piles. The solution method is based on Smoothed Particle Hydrodynamics (SPH) and the soil is modeled using a simplified hypoplastic material law. In order to correctly compute the forces on the soil due to the contact between the pile and the soil, a formulation for imposing frictional boundary conditions using SPH is developed. Modeling the soil with the chosen hypoplastic approach also allows for tensile forces in the soil. However, these are not physical. Therefore, an alternative formulation is presented which directly eliminates unphysical tensile stresses in the cohesionless soil without any additional numerical parameters. The numerical code is firstly validated against benchmark problems. Then several test cases are simulated including monotonic and cyclic penetration of piles into the soil. A good agreement with the experimental observation is found. Additionally, the impact of pile driving in the presence of sheetpiles (retainers) is investigated to see how the pile driving can alter the applied forces on the sheet piles. The simulation of such complex geotechnical problems that involve large deformation, material nonlinearity, and moving boundary conditions demonstrates the applicability and versatility of the proposed numerical tool in this field.",
keywords = "Hypoplasticity, Pileinstallation processes, Smoothed particle hydrodynamics, Soil-structure interaction",
author = "Meisam Soleimani and Christian Wei{\ss}enfels",
note = "Funding Information: This project was funded by the Ministry of Science and Culture (MWK) of Lower Saxony, Germany within the framework of the SMARTBIOTECS alliance between the Technical University of Braunschweig and the Leibniz University of Hannover. The authors acknowledge this support. ",
year = "2021",
month = may,
doi = "10.1016/j.compgeo.2021.104006",
language = "English",
volume = "133",
journal = "Computers and Geotechnics",
issn = "0266-352X",
publisher = "Elsevier BV",

}

Download

TY - JOUR

T1 - Numerical simulation of pile installations in a hypoplastic framework using an SPH based method

AU - Soleimani, Meisam

AU - Weißenfels, Christian

N1 - Funding Information: This project was funded by the Ministry of Science and Culture (MWK) of Lower Saxony, Germany within the framework of the SMARTBIOTECS alliance between the Technical University of Braunschweig and the Leibniz University of Hannover. The authors acknowledge this support.

PY - 2021/5

Y1 - 2021/5

N2 - This paper presents a tool to estimate the stresses, and thus the expected forces, at a retaining wall by the installation of piles. The solution method is based on Smoothed Particle Hydrodynamics (SPH) and the soil is modeled using a simplified hypoplastic material law. In order to correctly compute the forces on the soil due to the contact between the pile and the soil, a formulation for imposing frictional boundary conditions using SPH is developed. Modeling the soil with the chosen hypoplastic approach also allows for tensile forces in the soil. However, these are not physical. Therefore, an alternative formulation is presented which directly eliminates unphysical tensile stresses in the cohesionless soil without any additional numerical parameters. The numerical code is firstly validated against benchmark problems. Then several test cases are simulated including monotonic and cyclic penetration of piles into the soil. A good agreement with the experimental observation is found. Additionally, the impact of pile driving in the presence of sheetpiles (retainers) is investigated to see how the pile driving can alter the applied forces on the sheet piles. The simulation of such complex geotechnical problems that involve large deformation, material nonlinearity, and moving boundary conditions demonstrates the applicability and versatility of the proposed numerical tool in this field.

AB - This paper presents a tool to estimate the stresses, and thus the expected forces, at a retaining wall by the installation of piles. The solution method is based on Smoothed Particle Hydrodynamics (SPH) and the soil is modeled using a simplified hypoplastic material law. In order to correctly compute the forces on the soil due to the contact between the pile and the soil, a formulation for imposing frictional boundary conditions using SPH is developed. Modeling the soil with the chosen hypoplastic approach also allows for tensile forces in the soil. However, these are not physical. Therefore, an alternative formulation is presented which directly eliminates unphysical tensile stresses in the cohesionless soil without any additional numerical parameters. The numerical code is firstly validated against benchmark problems. Then several test cases are simulated including monotonic and cyclic penetration of piles into the soil. A good agreement with the experimental observation is found. Additionally, the impact of pile driving in the presence of sheetpiles (retainers) is investigated to see how the pile driving can alter the applied forces on the sheet piles. The simulation of such complex geotechnical problems that involve large deformation, material nonlinearity, and moving boundary conditions demonstrates the applicability and versatility of the proposed numerical tool in this field.

KW - Hypoplasticity

KW - Pileinstallation processes

KW - Smoothed particle hydrodynamics

KW - Soil-structure interaction

UR - http://www.scopus.com/inward/record.url?scp=85101320859&partnerID=8YFLogxK

U2 - 10.1016/j.compgeo.2021.104006

DO - 10.1016/j.compgeo.2021.104006

M3 - Article

AN - SCOPUS:85101320859

VL - 133

JO - Computers and Geotechnics

JF - Computers and Geotechnics

SN - 0266-352X

M1 - 104006

ER -

Von denselben Autoren