Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Annals of DAAAM for 2006 and Proceedings of the 17th International DAAAM Symposium on Intelligent Manufacturing and Automation |
| Untertitel | Focus on Mechatronics and Robotics |
| Seiten | 367-368 |
| Seitenumfang | 2 |
| Publikationsstatus | Veröffentlicht - 2006 |
| Veranstaltung | Annals of DAAAM for 2006 and 17th International DAAAM Symposium on Intelligent Manufacturing and Automation: Focus on Mechatronics and Robotics - Vienna, Österreich Dauer: 8 Nov. 2006 → 11 Nov. 2006 |
Publikationsreihe
| Name | Annals of DAAAM and Proceedings of the International DAAAM Symposium |
|---|---|
| ISSN (Print) | 1726-9679 |
Abstract
This paper gives an insight into a new approach for the representation of geometries for simulation based cutting force prediction in end milling processes. The shown calculation of tool engagement is based on level curves representing the geometries of the workpiece and NC code driven sweep volume. Derived from the tool engagement cutting forces are predicted using a parametric force model. Experiments are conducted and the measured forces are compared to the results of the simulation to verify the proposed method.
ASJC Scopus Sachgebiete
- Informatik (insg.)
- Angewandte Informatik
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Ingenieurwesen (insg.)
- Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Annals of DAAAM for 2006 and Proceedings of the 17th International DAAAM Symposium on Intelligent Manufacturing and Automation: Focus on Mechatronics and Robotics. 2006. S. 367-368 (Annals of DAAAM and Proceedings of the International DAAAM Symposium).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Level curve based geometry representation for cutting force prediction
AU - Schmidt, C.
PY - 2006
Y1 - 2006
N2 - This paper gives an insight into a new approach for the representation of geometries for simulation based cutting force prediction in end milling processes. The shown calculation of tool engagement is based on level curves representing the geometries of the workpiece and NC code driven sweep volume. Derived from the tool engagement cutting forces are predicted using a parametric force model. Experiments are conducted and the measured forces are compared to the results of the simulation to verify the proposed method.
AB - This paper gives an insight into a new approach for the representation of geometries for simulation based cutting force prediction in end milling processes. The shown calculation of tool engagement is based on level curves representing the geometries of the workpiece and NC code driven sweep volume. Derived from the tool engagement cutting forces are predicted using a parametric force model. Experiments are conducted and the measured forces are compared to the results of the simulation to verify the proposed method.
KW - Cutting simulation
KW - End milling
KW - Polygon clipping
UR - http://www.scopus.com/inward/record.url?scp=84896297857&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84896297857
SN - 3901509577
SN - 9783901509575
T3 - Annals of DAAAM and Proceedings of the International DAAAM Symposium
SP - 367
EP - 368
BT - Annals of DAAAM for 2006 and Proceedings of the 17th International DAAAM Symposium on Intelligent Manufacturing and Automation
T2 - Annals of DAAAM for 2006 and 17th International DAAAM Symposium on Intelligent Manufacturing and Automation: Focus on Mechatronics and Robotics
Y2 - 8 November 2006 through 11 November 2006
ER -