TY - GEN

T1 - Learning the Forward and Inverse Kinematics of a 6-DOF Concentric Tube Continuum Robot in SE(3)

AU - Grassmann, R.

AU - Modes, V.

AU - Burgner-Kahrs, J.

N1 - Publisher Copyright: © 2018 IEEE. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.

PY - 2018/12/27

Y1 - 2018/12/27

N2 - Recent physics-based models of concentric tube continuum robots are able to describe pose of the tip, given the preformed translation and rotation in joint space of the robot. However, such model-based approaches are associated with high computational load and highly non-linear modeling effort. A data-driven approach for computationally fast estimation of the kinematics without requiring the knowledge and the uncertainties in the physics-based model would be an asset. This paper introduces an approach to solve the forward kinematics as well as the inverse kinematics of concentric tube continuum robots with 6-DOF in three dimensional space SE(3). Two artificial neural networks with ReLU (rectified linear unit) activation functions are designed in order to approximate the respective kinematics. Measured data from a robot prototype are used in order to train, validate, and test the proposed approach. We introduce a representation of the rotatory joints by trigonometric functions that improves the accuracy of the approximation. The results with experimental measurements show higher accuracy for the forward kinematics compared to the state of the art mechanics modeling. The tip error is less then 2.3 mm w.r.t. position (1 % of total robot length) and 1.1° w.r.t. orientation. The single artificial neural network for the inverse kinematics approximation achieves a translation and rotation actuator error of 4.0 mm and 8.3 0, respectively.

AB - Recent physics-based models of concentric tube continuum robots are able to describe pose of the tip, given the preformed translation and rotation in joint space of the robot. However, such model-based approaches are associated with high computational load and highly non-linear modeling effort. A data-driven approach for computationally fast estimation of the kinematics without requiring the knowledge and the uncertainties in the physics-based model would be an asset. This paper introduces an approach to solve the forward kinematics as well as the inverse kinematics of concentric tube continuum robots with 6-DOF in three dimensional space SE(3). Two artificial neural networks with ReLU (rectified linear unit) activation functions are designed in order to approximate the respective kinematics. Measured data from a robot prototype are used in order to train, validate, and test the proposed approach. We introduce a representation of the rotatory joints by trigonometric functions that improves the accuracy of the approximation. The results with experimental measurements show higher accuracy for the forward kinematics compared to the state of the art mechanics modeling. The tip error is less then 2.3 mm w.r.t. position (1 % of total robot length) and 1.1° w.r.t. orientation. The single artificial neural network for the inverse kinematics approximation achieves a translation and rotation actuator error of 4.0 mm and 8.3 0, respectively.

KW - actuators

KW - approximation theory

KW - neural nets

KW - position control

KW - robot kinematics

KW - forward kinematics

KW - concentric tube continuum robot

KW - high computational load

KW - nonlinear modeling effort

KW - data-driven approach

KW - physics-based model

KW - robot prototype

KW - inverse kinematics approximation

KW - artificial neural network

KW - ReLU

KW - rectified linear unit

KW - rotation actuator error

KW - trigonometric function

KW - mechanics modeling

KW - Electron tubes

KW - Robots

KW - Kinematics

KW - Neural networks

KW - Quaternions

KW - Computational modeling

KW - Load modeling

UR - http://www.scopus.com/inward/record.url?scp=85062986293&partnerID=8YFLogxK

U2 - 10.1109/iros.2018.8594451

DO - 10.1109/iros.2018.8594451

M3 - Conference contribution

T3 - IEEE International Conference on Intelligent Robots and Systems

SP - 5125

EP - 5132

BT - 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018

ER -