Details
Titel in Übersetzung | Setting the martensite content and surface roughness in the turning process |
---|---|
Originalsprache | Deutsch |
Seiten (von - bis) | 767-772 |
Seitenumfang | 6 |
Fachzeitschrift | WT Werkstattstechnik |
Jahrgang | 112 |
Ausgabenummer | 11-12 |
Publikationsstatus | Veröffentlicht - 12 Nov. 2022 |
Abstract
In addition to the geometry, the functionality of the component can also be adjusted on the basis of process planning by means of targeted subsurface influence in the machining process. Deformation-induced martensite transformation during the turning process provides hardening in the subsurface while maintaining ductility in the core of the component. Moreover, the surface roughness influences the component properties. The possibilities and limitations for simultaneous adjustment of both target variables through tailored process parameters selection are presented.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Ingenieurwesen (insg.)
- Fahrzeugbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: WT Werkstattstechnik, Jahrgang 112, Nr. 11-12, 12.11.2022, S. 767-772.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Funktionsorientierte Stellgrößenauslegung beim Drehen/Setting the martensite content and surface roughness in the turning process
T2 - Funktionsorientierte Stellgrößenauslegung beim Drehen
AU - Denkena, Berend
AU - Breidenstein, Bernd
AU - Wichmann, Marcel
AU - Nguyen, Hai Nam
AU - Fricke, Lara Vivian
AU - Barton, Sebastian
AU - Maier, Hans Jürgen
N1 - Funding Information: Die Arbeit wurde von der Deutschen Forschungsgemeinschaft DFG im Rahmen des Schwerpunktprogramms SPP 2086 mit der Projektnummer 401800578 gefördert. Die Autoren danken der DFG für die finanzielle und technische Unterstützung.
PY - 2022/11/12
Y1 - 2022/11/12
N2 - In addition to the geometry, the functionality of the component can also be adjusted on the basis of process planning by means of targeted subsurface influence in the machining process. Deformation-induced martensite transformation during the turning process provides hardening in the subsurface while maintaining ductility in the core of the component. Moreover, the surface roughness influences the component properties. The possibilities and limitations for simultaneous adjustment of both target variables through tailored process parameters selection are presented.
AB - In addition to the geometry, the functionality of the component can also be adjusted on the basis of process planning by means of targeted subsurface influence in the machining process. Deformation-induced martensite transformation during the turning process provides hardening in the subsurface while maintaining ductility in the core of the component. Moreover, the surface roughness influences the component properties. The possibilities and limitations for simultaneous adjustment of both target variables through tailored process parameters selection are presented.
UR - http://www.scopus.com/inward/record.url?scp=85144673732&partnerID=8YFLogxK
U2 - 10.37544/1436-4980-2022-11-12-41
DO - 10.37544/1436-4980-2022-11-12-41
M3 - Artikel
AN - SCOPUS:85144673732
VL - 112
SP - 767
EP - 772
JO - WT Werkstattstechnik
JF - WT Werkstattstechnik
IS - 11-12
ER -