Details
| Titel in Übersetzung | The influence of plasticizer aerosols on sampling and analysis of air pollutants in the rubber industry |
|---|---|
| Originalsprache | Deutsch |
| Seiten (von - bis) | 200-205 |
| Seitenumfang | 6 |
| Fachzeitschrift | KGK-Kautschuk und Gummi Kunststoffe |
| Jahrgang | 49 |
| Ausgabenummer | 3 |
| Publikationsstatus | Veröffentlicht - März 1996 |
| Extern publiziert | Ja |
Abstract
A sampling system for fumes and aerosols from rubber products must be developed with special attention to the influence of plasticizer aerosols on the sampling process itself. The efficiency of sampling with a combination of selective adsorbents in the presence of plasticizer aerosols is tested by means of test gas mixtures and test aerosols in simulation tests. The analytical determination of individual substances and aerosols is carried out by means of gas chromatography and FT-IR-spectroscopy after desorption of the adsorbents with a solute. Interferences caused by plasticizer aerosols only occur at high concentration levels of about 58 mg/m3, which is far above the threshold limit (MAK) of 10 mg/ m3 for di-(2-ethylhexyl)-phthalat.
Schlagwörter
- Aerosol, Air sampling, Curing fumes, Plasticizer, Test atmosphere
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Maschinenbau
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: KGK-Kautschuk und Gummi Kunststoffe, Jahrgang 49, Nr. 3, 03.1996, S. 200-205.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Einfluß von Weichmacheraerosolen auf die Probenahme und Analytik von Luftinhaltsstoffen in der Gummiindustrie
AU - Will, T.
AU - Giese, U.
PY - 1996/3
Y1 - 1996/3
N2 - A sampling system for fumes and aerosols from rubber products must be developed with special attention to the influence of plasticizer aerosols on the sampling process itself. The efficiency of sampling with a combination of selective adsorbents in the presence of plasticizer aerosols is tested by means of test gas mixtures and test aerosols in simulation tests. The analytical determination of individual substances and aerosols is carried out by means of gas chromatography and FT-IR-spectroscopy after desorption of the adsorbents with a solute. Interferences caused by plasticizer aerosols only occur at high concentration levels of about 58 mg/m3, which is far above the threshold limit (MAK) of 10 mg/ m3 for di-(2-ethylhexyl)-phthalat.
AB - A sampling system for fumes and aerosols from rubber products must be developed with special attention to the influence of plasticizer aerosols on the sampling process itself. The efficiency of sampling with a combination of selective adsorbents in the presence of plasticizer aerosols is tested by means of test gas mixtures and test aerosols in simulation tests. The analytical determination of individual substances and aerosols is carried out by means of gas chromatography and FT-IR-spectroscopy after desorption of the adsorbents with a solute. Interferences caused by plasticizer aerosols only occur at high concentration levels of about 58 mg/m3, which is far above the threshold limit (MAK) of 10 mg/ m3 for di-(2-ethylhexyl)-phthalat.
KW - Aerosol
KW - Air sampling
KW - Curing fumes
KW - Plasticizer
KW - Test atmosphere
UR - http://www.scopus.com/inward/record.url?scp=0030107166&partnerID=8YFLogxK
M3 - Artikel
AN - SCOPUS:0030107166
VL - 49
SP - 200
EP - 205
JO - KGK-Kautschuk und Gummi Kunststoffe
JF - KGK-Kautschuk und Gummi Kunststoffe
SN - 0948-3276
IS - 3
ER -