Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | 33rd Wind Energy Symposium |
| Herausgeber (Verlag) | American Institute of Aeronautics and Astronautics Inc. (AIAA) |
| ISBN (elektronisch) | 9781624103445 |
| Publikationsstatus | Veröffentlicht - 2015 |
| Veranstaltung | 33rd Wind Energy Symposium 2015 - Kissimmee, USA / Vereinigte Staaten Dauer: 5 Jan. 2015 → 9 Jan. 2015 |
Publikationsreihe
| Name | 33rd Wind Energy Symposium |
|---|
Abstract
The length of wind turbine rotor blades has been increasing over the last few decades. Higher stresses arise, particularly at the blade root because of the longer lever arm. One way to reduce unsteady blade-root stresses caused by turbulence, gusts, or wind shear is to actively control the lift in the blade tip region. Airfoils with morphing trailing edges represent one promising method to control the lift, and consequently the loads acting on the blade. In the present study, the unsteady behavior and load reduction potential of an airfoil with a morphing trailing edge is investigated. Time-resolved, two-dimensional Reynolds-Averaged Navier-Stokes (RANS) simulations are performed for a typical thin wind turbine airfoil with a morphing trailing edge. A deformable grid is used to simulate the trailing edge movement. First, simulations are carried out focusing on the phase shift between the trailing edge deflection and the dynamic lift coefficient. Based on the results, a dynamic change in angle of attack and a simultaneously variably deflected trailing edge is simulated. It is shown that the unsteady lift coefficient resulting from the dynamic angle of attack can be reduced to a near-zero value, if the trailing edge is phased such as to counter the pitch motion. In contrast, the dynamic lift can be increased by the trailing edge deflection if the angle of attack and the deformable trailing edge oscillate in phase.
ASJC Scopus Sachgebiete
- Energie (insg.)
- Erneuerbare Energien, Nachhaltigkeit und Umwelt
- Ingenieurwesen (insg.)
- Maschinenbau
Ziele für nachhaltige Entwicklung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
33rd Wind Energy Symposium. American Institute of Aeronautics and Astronautics Inc. (AIAA), 2015. (33rd Wind Energy Symposium).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Airfoil with morphing trailing edge for load reduction in wind turbines
AU - Wolff, Torben
AU - Seume, Joerg R.
PY - 2015
Y1 - 2015
N2 - The length of wind turbine rotor blades has been increasing over the last few decades. Higher stresses arise, particularly at the blade root because of the longer lever arm. One way to reduce unsteady blade-root stresses caused by turbulence, gusts, or wind shear is to actively control the lift in the blade tip region. Airfoils with morphing trailing edges represent one promising method to control the lift, and consequently the loads acting on the blade. In the present study, the unsteady behavior and load reduction potential of an airfoil with a morphing trailing edge is investigated. Time-resolved, two-dimensional Reynolds-Averaged Navier-Stokes (RANS) simulations are performed for a typical thin wind turbine airfoil with a morphing trailing edge. A deformable grid is used to simulate the trailing edge movement. First, simulations are carried out focusing on the phase shift between the trailing edge deflection and the dynamic lift coefficient. Based on the results, a dynamic change in angle of attack and a simultaneously variably deflected trailing edge is simulated. It is shown that the unsteady lift coefficient resulting from the dynamic angle of attack can be reduced to a near-zero value, if the trailing edge is phased such as to counter the pitch motion. In contrast, the dynamic lift can be increased by the trailing edge deflection if the angle of attack and the deformable trailing edge oscillate in phase.
AB - The length of wind turbine rotor blades has been increasing over the last few decades. Higher stresses arise, particularly at the blade root because of the longer lever arm. One way to reduce unsteady blade-root stresses caused by turbulence, gusts, or wind shear is to actively control the lift in the blade tip region. Airfoils with morphing trailing edges represent one promising method to control the lift, and consequently the loads acting on the blade. In the present study, the unsteady behavior and load reduction potential of an airfoil with a morphing trailing edge is investigated. Time-resolved, two-dimensional Reynolds-Averaged Navier-Stokes (RANS) simulations are performed for a typical thin wind turbine airfoil with a morphing trailing edge. A deformable grid is used to simulate the trailing edge movement. First, simulations are carried out focusing on the phase shift between the trailing edge deflection and the dynamic lift coefficient. Based on the results, a dynamic change in angle of attack and a simultaneously variably deflected trailing edge is simulated. It is shown that the unsteady lift coefficient resulting from the dynamic angle of attack can be reduced to a near-zero value, if the trailing edge is phased such as to counter the pitch motion. In contrast, the dynamic lift can be increased by the trailing edge deflection if the angle of attack and the deformable trailing edge oscillate in phase.
UR - http://www.scopus.com/inward/record.url?scp=84937676533&partnerID=8YFLogxK
M3 - Conference contribution
T3 - 33rd Wind Energy Symposium
BT - 33rd Wind Energy Symposium
PB - American Institute of Aeronautics and Astronautics Inc. (AIAA)
T2 - 33rd Wind Energy Symposium 2015
Y2 - 5 January 2015 through 9 January 2015
ER -