Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 1-6 |
| Seitenumfang | 6 |
| Fachzeitschrift | Solid State Phenomena |
| Jahrgang | 113 |
| Publikationsstatus | Veröffentlicht - 2006 |
| Extern publiziert | Ja |
Abstract
FEM is a very important tool for getting the numerical solution of many engineering problems. It has been widely used in solving structural, mechanical, heat transfer, and fluid dynamics’ problems as well as problems of other disciplines such as piezoelectricity. Since the complexity of many problems leads to the formation of models of large dimension, which are described with many degrees of freedom, their numeric solution makes for the highest demands. The number of degrees of freedom is often unnecessarily large to represent the structural response in a limited bandwidth and therefore, in such a case, a reduction should be conducted. The systematic reduction of complex FE models on simple electromechanical equivalent circuit models (with less mechanical degrees of freedom) is the subject of this paper. The aim of the work is to make the reduction in such a way that the characteristics of the systems input/output descriptions are approximated within a pre-selectable frequency range with sufficient accuracy. A transducerwedge- system is used as an example for the method, to extract a state space model of the systems piezoelectric input/output description and to derive the parameters of the electromechanical equivalent circuit directly from the modal finite element analysis. In the present paper we describe the general methodology as well as its application to piezoelectric transducers as used in ultrasonic engineering.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Atom- und Molekularphysik sowie Optik
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Solid State Phenomena, Jahrgang 113, 2006, S. 1-6.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - A Methodology for Automatically Deriving Simple Electromechanical Equivalent Models from FEM-Models
AU - Król, Rafal
AU - Brökelmann, Michael
AU - Wallaschek, Jörg
N1 - Publisher Copyright: © (2006) Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.
PY - 2006
Y1 - 2006
N2 - FEM is a very important tool for getting the numerical solution of many engineering problems. It has been widely used in solving structural, mechanical, heat transfer, and fluid dynamics’ problems as well as problems of other disciplines such as piezoelectricity. Since the complexity of many problems leads to the formation of models of large dimension, which are described with many degrees of freedom, their numeric solution makes for the highest demands. The number of degrees of freedom is often unnecessarily large to represent the structural response in a limited bandwidth and therefore, in such a case, a reduction should be conducted. The systematic reduction of complex FE models on simple electromechanical equivalent circuit models (with less mechanical degrees of freedom) is the subject of this paper. The aim of the work is to make the reduction in such a way that the characteristics of the systems input/output descriptions are approximated within a pre-selectable frequency range with sufficient accuracy. A transducerwedge- system is used as an example for the method, to extract a state space model of the systems piezoelectric input/output description and to derive the parameters of the electromechanical equivalent circuit directly from the modal finite element analysis. In the present paper we describe the general methodology as well as its application to piezoelectric transducers as used in ultrasonic engineering.
AB - FEM is a very important tool for getting the numerical solution of many engineering problems. It has been widely used in solving structural, mechanical, heat transfer, and fluid dynamics’ problems as well as problems of other disciplines such as piezoelectricity. Since the complexity of many problems leads to the formation of models of large dimension, which are described with many degrees of freedom, their numeric solution makes for the highest demands. The number of degrees of freedom is often unnecessarily large to represent the structural response in a limited bandwidth and therefore, in such a case, a reduction should be conducted. The systematic reduction of complex FE models on simple electromechanical equivalent circuit models (with less mechanical degrees of freedom) is the subject of this paper. The aim of the work is to make the reduction in such a way that the characteristics of the systems input/output descriptions are approximated within a pre-selectable frequency range with sufficient accuracy. A transducerwedge- system is used as an example for the method, to extract a state space model of the systems piezoelectric input/output description and to derive the parameters of the electromechanical equivalent circuit directly from the modal finite element analysis. In the present paper we describe the general methodology as well as its application to piezoelectric transducers as used in ultrasonic engineering.
KW - Bonding transducer-tool-system
KW - Electromechanical equivalent circuit model
KW - FEM
KW - State space model
UR - http://www.scopus.com/inward/record.url?scp=84983552191&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/SSP.113.1
DO - 10.4028/www.scientific.net/SSP.113.1
M3 - Article
AN - SCOPUS:84983552191
VL - 113
SP - 1
EP - 6
JO - Solid State Phenomena
JF - Solid State Phenomena
SN - 1012-0394
ER -