Loading [MathJax]/extensions/tex2jax.js

Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

1 - 40 out of 65Page size: 40
Order:

Publications

  1. 2025

  2. E-pub ahead of print

    Effects of severe ausforming on hierarchical microstructural development and mechanical performance in a martensitic high-strength steel

    Vaughan, M. W., Gerstein, G., Harris, R. C., Gibbons, S. L., Barber, R. E., Maier, H. J. & Karaman, I., Sept 2025, In: Materials Science and Engineering: A. 939, 24 p., 148337.

    Research output: Contribution to journal › Article › Research › peer review

  3. 2024

  4. Published

    Microstructure and shape memory behavior of a bi-layer fabricated by NiTi deposition on NiTiCu substrate using laser powder bed fusion

    Memarian, M., Mohri, M., Leinenbach, C., Kulkarni, P. V., Ghafoori, E. & Nili-Ahmadabadi, M., Nov 2024, In: Materials Science and Engineering: A. 916, 147309.

    Research output: Contribution to journal › Article › Research › peer review

  5. 2023

  6. Published

    Influence of the grain orientation and δ-ferrite on the cyclic deformation behavior of an austenitic CrNi steel manufactured by wire and arc additive manufacturing

    Blinn, B., Hassel, T., Viebranz, V. F., Beck, T. & Maier, H. J., 12 Apr 2023, In: Materials Science and Engineering A. 870, 144612.

    Research output: Contribution to journal › Article › Research › peer review

  7. 2022

  8. External

    Effect of thermomechanical treatment and microstructure on pseudo-elastic behavior of Fe–Mn–Si–Cr–Ni-(V, C) shape memory alloy

    Mohri, M., Ferretto, I., Leinenbach, C., Kim, D., Lignos, D. G. & Ghafoori, E., 10 Oct 2022, In: Materials Science and Engineering: A. 855, 143917.

    Research output: Contribution to journal › Article › Research › peer review

  9. 2021

  10. Published

    Crack initiation of an industrial 7XXX aluminum alloy in humid air analyzed via slow strain rate testing and constant displacement testing

    Schwarzenböck, E., Wiehler, L., Heidenblut, T., Hack, T., Engel, C. & Maier, H. J., 15 Feb 2021, In: Materials Science and Engineering A. 804, 140776.

    Research output: Contribution to journal › Article › Research › peer review

  11. Published

    Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading

    Gurel, S., Yagci, M. B., Canadinc, D., Gerstein, G., Bal, B. & Maier, H., 28 Jan 2021, In: Materials Science and Engineering A. 803, 140456.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    On the high cyclic stability of the tensile two-way shape memory effect in stress-induced martensite aged Co35Ni35Al30 single crystals

    Eftifeeva, A., Panchenko, E., Chumlyakov, Y., Yanushonite, E., Gerstein, G. & Maier, H., 2 Jan 2021, In: Materials Science and Engineering A. 799, 140166.

    Research output: Contribution to journal › Article › Research › peer review

  13. 2020

  14. Published

    Influence of Ti3Ni4 precipitates on the indentation-induced two-way shape-memory effect in Nickel-Titanium

    Laursen, C. M., Peter, N. J., Gerstein, G., Maier, H., Dehm, G. & Frick, C. P., 5 Aug 2020, In: Materials Science and Engineering A. 792, 139373.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Influence of incorporated nanoparticles on superelastic behavior of shape memory alloys

    L'vov, V. A., Kosogor, A., Palamarchuk, S. I., Gerstein, G. & Maier, H. J., 3 Mar 2020, In: Materials Science and Engineering A. 776, 139025.

    Research output: Contribution to journal › Article › Research › peer review

  16. 2019

  17. Published

    Compressive shape memory actuation response of stress-induced martensite aged Ni 51 Fe 18 Ga 27 Co 4 single crystals

    Panchenko, E. Y., Timofeeva, E. E., Chumlyakov, Y. I., Osipovich, K. S., Tagiltsev, A. I., Gerstein, G. & Maier, H. J., 11 Feb 2019, In: Materials Science and Engineering A. 746, p. 448-455 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. 2017

  19. Published

    Two-way shape memory effect under multi-cycles in [001]-oriented Ni49Fe18Ga27Co6 single crystal

    Panchenko, E. Y., Timofeeva, E. E., Larchenkova, N. G., Chumlyakov, Y. I., Tagiltsev, A. I., Maier, H. J. & Gerstein, G., 18 Sept 2017, In: Materials Science and Engineering A. 706, p. 95-103 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    Microstructure and mechanical properties of friction welded steel-aluminum hybrid components after T6 heat treatment

    Herbst, S., Aengeneyndt, H., Maier, H. J. & Nürnberger, F., 14 Apr 2017, In: Materials Science and Engineering A. 696, p. 33-41 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  21. 2016

  22. Published

    Effect of indentation temperature on nickel-titanium indentation-induced two-way shape-memory surfaces

    Brinckmann, S. A., Frensemeier, M., Laursen, C. M., Maier, H. J., Britz, D., Mücklich, F., Frick, C. P. & Schneider, A. S., 15 Oct 2016, In: Materials Science and Engineering A. 675, p. 253-261 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  23. Published

    Prediction of fracture toughness in ductile-to-brittle transition region using combined CDM and Beremin models

    Moattari, M., Sattari-Far, I., Persechino, I. & Bonora, N., 2016, In: Materials Science and Engineering A.

    Research output: Contribution to journal › Article › Research › peer review

  24. 2015

  25. Published

    Twinning activities in high-Mn austenitic steels under high-velocity compressive loading

    Gumus, B., Bal, B., Gerstein, G., Canadinc, D., Maier, H. J., Guner, F. & Elmadagli, M., 12 Sept 2015, In: Materials Science and Engineering A. 648, p. 104-112 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  26. Published

    One-way and two-way shape memory effect in ferromagnetic NiFeGaCo single crystals

    Timofeeva, E. E., Panchenko, E. Y., Chumlyakov, Y. I., Vetoshkina, N. G. & Maier, H. J., 9 Jul 2015, In: Materials Science and Engineering A. 640, p. 465-470 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  27. Published

    On the micro-deformation mechanisms active in high-manganese austenitic steels under impact loading

    Bal, B., Gumus, B., Gerstein, G., Canadinc, D. & Maier, H. J., 27 Feb 2015, In: Materials Science and Engineering A. 632, p. 29-34 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  28. Published

    Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy

    Karaca, H. E., Acar, E., Ded, G. S., Saghaian, S. M., Basaran, B., Tobe, H., Kok, M., Maier, H. J., Noebe, R. D. & Chumlyakov, Y. I., 6 Jan 2015, In: Materials Science and Engineering A. 627, p. 82-94 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  29. 2014

  30. Published

    Functional and structural fatigue of titanium tantalum high temperature shape memory alloys (HT SMAs)

    Niendorf, T., Krooß, P., Batyrsina, E., Paulsen, A., Motemani, Y., Ludwig, A., Buenconsejo, P., Frenzel, J., Eggeler, G. & Maier, H. J., 22 Oct 2014, In: Materials Science and Engineering A. 620, p. 359-366 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  31. Published

    Improvement of formability of ultrafine-grained materials by post-SPD annealing

    Saray, O., Purcek, G., Karaman, I. & Maier, H. J., 16 Sept 2014, In: Materials Science and Engineering A. 619, p. 119-128 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  32. Published

    Microstructure and mechanical response of single-crystalline high-manganese austenitic steels under high-pressure torsion: The effect of stacking-fault energy

    Astafurova, E. G., Tukeeva, M. S., Maier, G. G., Melnikov, E. V. & Maier, H. J., 17 Mar 2014, In: Materials Science and Engineering A. 604, p. 166-175 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  33. 2013

  34. Published

    On the role of slip-twin interactions on the impact behavior of high-manganese austenitic steels

    Toker, S. M., Canadinc, D., Taube, A., Gerstein, G. & Maier, H. J., 18 Nov 2013, In: Materials Science and Engineering A. 593, p. 120-126 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  35. Published

    Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading

    Kanagarajah, P., Brenne, F., Niendorf, T. & Maier, H. J., 14 Sept 2013, In: Materials Science and Engineering A. 588, p. 188-195 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  36. Published

    Slip transmission in bcc FeCr polycrystal

    Patriarca, L., Abuzaid, W., Sehitoglu, H. & Maier, H. J., 2 Sept 2013, In: Materials Science and Engineering A. 588, p. 308-317 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  37. Published

    Annealing behavior of ultrafine grained structure in low-carbon steel produced by equal channel angular pressing

    Maier, G. G., Astafurova, E. G., Maier, H. J., Naydenkin, E. V., Raab, G. I., Odessky, P. D. & Dobatkin, S. V., 15 Jun 2013, In: Materials Science and Engineering A. 581, p. 104-107 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  38. 2012

  39. External

    Influence of bulk pre-straining on the size effect in nickel compression pillars

    Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 18 Aug 2012, In: Materials Science and Engineering A. 559, p. 147-158 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. External

    Higher order twin modes in martensitic NiTi: The (201̄) case

    Ezaz, T., Sehitoglu, H., Abuzaid, W. & Maier, H. J., 14 Aug 2012, In: Materials Science and Engineering A. 558, p. 422-430 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  41. External

    Evolution of transformation plasticity in austenite-to-bainite phase transformation: A multi parameter problem

    Lambers, H. G., Canadinc, D. & Maier, H. J., 10 Feb 2012, In: Materials Science and Engineering A. 541, p. 73-80 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  42. 2011

  43. External

    Severe plastic deformation of Ti74Nb26 shape memory alloys

    Ma, J., Karaman, I., Kockar, B., Maier, H. J. & Chumlyakov, Y. I., 25 Sept 2011, In: Materials Science and Engineering A. 528, 25-26, p. 7628-7635 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  44. External

    In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting

    Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Troester, T. & Maier, H. J., 22 Jul 2011, In: Materials Science and Engineering A. 528, 27, p. 7962-7967 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  45. External

    Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties

    Saray, O., Purcek, G., Karaman, I., Neindorf, T. & Maier, H. J., 19 May 2011, In: Materials Science and Engineering A. 528, 21, p. 6573-6583 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  46. External

    On the volume change in Co-Ni-Al during pseudoelasticity

    Dilibal, S., Sehitoglu, H., Hamilton, R. F., Maier, H. J. & Chumlyakov, Y., 15 May 2011, In: Materials Science and Engineering A. 528, 6, p. 2875-2881 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  47. External

    A comprehensive evaluation of parameters governing the cyclic stability of ultrafine-grained FCC alloys

    Canadinc, D., Niendorf, T. & Maier, H. J., 22 Apr 2011, In: Materials Science and Engineering A. 528, 21, p. 6345-6355 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  48. 2010

  49. External

    Fatigue crack growth-Microstructure relationships in a high-manganese austenitic TWIP steel

    Niendorf, T., Rubitschek, F., Maier, H. J., Niendorf, J., Richard, H. A. & Frehn, A., 17 Dec 2010, In: Materials Science and Engineering A. 527, 9, p. 2412-2417 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  50. External

    Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium

    Purcek, G., Yapici, G. G., Karaman, I. & Maier, H. J., 13 Nov 2010, In: Materials Science and Engineering A. 528, 6, p. 2303-2308 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  51. External

    Underlying mechanism of dual hysteresis in NiMnGa single crystals

    Hamilton, R. F., Dilibal, S., Sehitoglu, H. & Maier, H. J., 22 Oct 2010, In: Materials Science and Engineering A. 528, 3, p. 1877-1881 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  52. External

    Grain boundary characterization and energetics of superalloys

    Sangid, M. D., Sehitoglu, H., Maier, H. J. & Niendorf, T., 27 Jul 2010, In: Materials Science and Engineering A. 527, 26, p. 7115-7125 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  53. External

    Characterization of grain microstructure development in the aluminum alloy EN AW-6060 during extrusion

    Kayser, T., Klusemann, B., Lambers, H. G., Maier, H. J. & Svendsen, B., 26 Jun 2010, In: Materials Science and Engineering A. 527, 24-25, p. 6568-6573 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  54. External

    Three-dimensional modeling of the grain boundary misorientation angle distribution based on two-dimensional experimental texture measurements

    Biyikli, E., Canadinc, D., Maier, H. J., Niendorf, T. & Top, S., 11 Jun 2010, In: Materials Science and Engineering A. 527, 21-22, p. 5604-5612 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  55. External

    Pre-deformation-transformation plasticity relationship during martensitic transformation

    Lambers, H. G., Tschumak, S., Maier, H. J. & Canadinc, D., 15 Jan 2010, In: Materials Science and Engineering A. 527, 3, p. 625-633 9 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 Next