Details
Datum der Bereitstellung | 2021 |
---|---|
Herausgeber (Verlag) | Forschungsdaten-Repositorium der LUH |
Beschreibung
Voltage and current signal during Gas-Metal-Arc-Welding. Measurement Data acquiered using National Instruments USB-6361. Current was converted using a "Chauvin Arnoux PAC22".
Welding power source: Carl Cloos GLC 303 PA/3
Welding torch: Abicor Binzel ROBO WH W 500
Welding speed: 0.3 m/min
Process gas: ISO 14175 M21 (Ar-CO2 82-18)
Process gas flow: 18 l/min
Substrate material: Mild steel (S235)
Wire material: EN ISO 14341-A (2011) G42 4M21 3Si1
Wire diameter: 1.2 mm
Wire feed speed: 3.4 m/min
trainings_data.csv is acquired during the welding of a slope with an initial CTWD of 5 mm and a end CTWD of 30 mm.
eval_slope.csv is a repetion of the set-up used for trainings_data.csv.
eval_constant.csv uses a constant CTWD of 10 mm.
eval_lower_wire_feed.csv uses a reduced wire feed of 2.5 m/min.
Welding power source: Carl Cloos GLC 303 PA/3
Welding torch: Abicor Binzel ROBO WH W 500
Welding speed: 0.3 m/min
Process gas: ISO 14175 M21 (Ar-CO2 82-18)
Process gas flow: 18 l/min
Substrate material: Mild steel (S235)
Wire material: EN ISO 14341-A (2011) G42 4M21 3Si1
Wire diameter: 1.2 mm
Wire feed speed: 3.4 m/min
trainings_data.csv is acquired during the welding of a slope with an initial CTWD of 5 mm and a end CTWD of 30 mm.
eval_slope.csv is a repetion of the set-up used for trainings_data.csv.
eval_constant.csv uses a constant CTWD of 10 mm.
eval_lower_wire_feed.csv uses a reduced wire feed of 2.5 m/min.