1 - 20 out of 162Page size: 20
  1. 2025
  2. Published

    Circular Economy Implementation for Plastic Products in SMEs: Framework Development and Practical Application in Case Studies

    Jürgens, M., Mudersbach, M. & Endres, H. J., Oct 2025, In: Circular economy and sustainability. 5, 5, p. 4629-4658 30 p.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Experimental study on ECC-based unreinforced shield tunnel segmental joints for future resilient infrastructure

    Cai, M., Rabczuk, T. & Zhuang, X., Oct 2025, In: Underground Space (new). 24, p. 283-310 28 p.

    Research output: Contribution to journal › Article › Research › peer review

  4. E-pub ahead of print

    Assessing Thermal Noise in GNSS Frequency Transfer: Insights from a Temperature Chamber Experiment

    Elmaghraby, A. M. A., Krawinkel, T., Kersten, T. & Schön, S., 4 Sept 2025, (E-pub ahead of print).

    Research output: Contribution to conference › Slides to presentation › Research

  5. Published

    Advancing from an Individual to a Combined ANTEX product: Final Results of the IGS Ring Calibration Campaign

    Kersten, T., Sutyagin, I., Bilich, A., Kröger, J. & Schön, S., 3 Sept 2025.

    Research output: Contribution to conference › Slides to presentation › Research

  6. Published

    Profiting From Regulation: The Effects of Emissions Standards on Abatement R&D

    Hardt, J. S., Hoppe-Wewetzer, H. & Klapper, F. B., 3 Sept 2025, In: Journal of public economic theory. 27, 5, e70055.

    Research output: Contribution to journal › Article › Research › peer review

  7. E-pub ahead of print

    Collaborative Efforts in GNSS Antenna Calibration: Evaluating Latitude-Dependent Position Deviations Using IGS Ring Calibration Data

    Kröger, J., Kersten, T., Bilich, A., Sutyagin, I. & Schön, S., 2 Sept 2025, (E-pub ahead of print).

    Research output: Contribution to conference › Poster › Research

  8. Published

    Estimation and Validation of multi-GNSS multi-Frequency Phase Center Corrections

    Kröger, J., 1 Sept 2025, 192 p.

    Research output: Thesis › Doctoral thesis

  9. Published

    Assessing the Ecological Value: Monetizing Process Innovations in Tailored Forming

    Schneider, J., Westing, J., Schmidt, M., Nyhuis, P. & Kuprat, V. K., 25 Aug 2025, In: Advanced engineering materials. 27, 16, 2401371.

    Research output: Contribution to journal › Article › Research › peer review

  10. E-pub ahead of print

    Collaborative Efforts in GNSS Antenna Calibration: Evaluating Position Deviations Using IGS Ring Calibration Data

    Kröger, J., Kersten, T. & Schön, S., 8 Aug 2025, (E-pub ahead of print).

    Research output: Contribution to conference › Slides to presentation › Research

  11. Published

    Valorization of agro-industrial waste to produce low-methoxyl pectin and its activation towards more sustainable applications and circular economy

    Benmebarek, I. E., Maqsood, S., Khalid, W., Navaf, M., Rasool, I. F. U., Moreno, A. & Esatbeyoglu, T., Aug 2025, In: International Journal of Biological Macromolecules. 320, 3, 145953.

    Research output: Contribution to journal › Review article › Research › peer review

  12. Published

    Methodology for the Economic Evaluation and Identification of Technical Effects of Process Innovations in the Early Stages of Innovation: The Case of Oxygen-Free Production

    Stefanowski, F., Jahangirkhani, T., Demke, T. M., Schmidt, M., Nyhuis, P. & Kuprat, V. K., 22 Jul 2025, Production at the Leading Edge of Technology: Proceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024. Springer Nature, p. 421-429 9 p. (Lecture Notes in Production Engineering; vol. Part F679).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  13. Published

    Enhancing German Manufacturing Competitiveness: Integrating B2B Platforms into the Industrial Value Chain

    Demir, M., Rieke, L., Herberger, D. & Nyhuis, P., 10 Jul 2025, Product Lifecycle Management. Integrating Digital Technologies for Sustainability and Innovation - 21st IFIP WG 5.1 International Conference, PLM 2024, Revised Selected Papers. Sureephong, P., Danjou, C. & Bouras, A. (eds.). Springer Science and Business Media Deutschland GmbH, p. 140-151 12 p. (Product Lifecycle Management. Integrating Digital Technologies for Sustainability and Innovation; vol. 740 IFIPAICT).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  14. Biochemical conversion of municipal solid waste to biofuels and bioproducts: a review

    Hans, M., Umrao, D., Velusamy, M., Kumar, D. & Kumar, S., Jul 2025, In: Environmental Science and Pollution Research. 32, 32, p. 19204–19224 21 p.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Edge Intelligence for Intelligent Transport Systems: Approaches, challenges, and future directions

    Ghasemi, A., Keshavarzi, A., M. Abdelmoniem, A., Nejati, O. R. & Derikvand, T., 25 Jun 2025, In: Expert systems with applications. 280, 29 p., 127273.

    Research output: Contribution to journal › Review article › Research › peer review

  16. Published

    Smart Mobility und soziale Exklusion aus der Perspektive von Jugendlichen

    van Hove, T. J., Koch, J. S. & Meyer, C., 9 Apr 2025, In: Zeitschrift für Geographiedidaktik (online). 2025, 53, p. 33-47 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Environmental Sustainability Assessment Of Factories With BIM: Relevance And Challenges For A Holistic Approach

    Philipp, L., Große-Wilde, L., Rieke, L., Hartmann, S., Schmidt, M. & Klemt-Albert, K., 18 Mar 2025, In: Proceedings of the Conference on Production Systems and Logistics. p. 149-161 13 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  18. Published

    Illustration Of The Need For A Synergetic Factory Planning For Sustainable Factory Operations

    Jahangirkhani, T., Petersen, T. & Schmidt, M., 18 Mar 2025, In: Proceedings of the Conference on Production Systems and Logistics. 2025, p. 93-102 10 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  19. Published

    Progress Update on a Global Collaboration for GNSS Receiver Antenna Calibration: Results from the IGS Ring Calibration Campaign (IGS ringCalVal)

    Kersten, T., Bilich, A., Sutyagin, I., Kröger, J. & Schön, S., 18 Mar 2025.

    Research output: Contribution to conference › Abstract › Research

  20. Published

    Collaboration in GNSS Antenna Calibration: Insights from the IGS Ring Calibration Campaign

    Schön, S., Kersten, T., Bilich, A. & Sutyagin, I., 15 Mar 2025.

    Research output: Contribution to conference › Abstract › Research

  21. Published

    Biogenic palm oil-based greases with glycerol monostearate and soy wax: A rheological and tribological study

    Nassef, B. G., Moradi, A., Bayer, G., Pape, F., Abouelkasem, Z. A., Rummel, F., Schmölzer, S., Poll, G. & Marian, M., Mar 2025, In: Results in Engineering. 25, 103728.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 3 4 5 6 7 8 9 Next