Details
Original language | English |
---|---|
Article number | 3519 |
Number of pages | 21 |
Journal | MATERIALS |
Volume | 17 |
Issue number | 14 |
Publication status | Published - 16 Jul 2024 |
Abstract
Due to its high strength, the use of ultra-high-performance concrete (UHPC) is particularly suitable for components subjected to compressive loads. Combined with its excellent durability, UHPC can be used to produce highly resource-efficient components that represent a sustainable alternative to conventional load-bearing structures. Since UHPC fails in a brittle manner without the addition of fibers, it is typically used in conjunction with micro steel fibers. The production of these steel fibers is both expensive and energy-intensive. Natural plant fibers, due to their good mechanical properties, cost-effective availability, and inherent CO2 neutrality, can provide a sustainable alternative to conventional steel fibers. Thanks to the low alkaline environment and dense matrix of UHPC, the use of natural plant fibers in terms of durability and bond is possible in principle. For the application of natural plant fibers in UHPC, however, knowledge of the load-bearing and post-cracking behavior or the performance of UHPC reinforced with natural plant fibers is essential. Currently, there are no tests available on the influence of different types of natural plant fibers on the load-bearing behavior of UHPC. Therefore, five series of compression and bending tensile tests were conducted. Three series were reinforced with natural plant fibers (bamboo, coir, and flax), one series without fibers, and one series with steel fibers as a reference. Under compression loads, the test specimens reinforced with natural plant fibers did not fail abruptly and exhibited a comparable post-failure behavior and damage pattern to the reference specimens reinforced with steel fibers. In contrast, the natural plant fibers did not perform as well as the steel fibers under bending tensile stress but did show a certain post-cracking bending tensile strength. A final life cycle assessment demonstrates the superiority of natural plant fibers and shows their positive impact on the environment.
Keywords
- life cycle assessment, natural fiber reinforced concrete, natural plant fibers, performance, post-failure behavior, ultra-high-performance concrete
ASJC Scopus subject areas
- Materials Science(all)
- Physics and Astronomy(all)
- Condensed Matter Physics
Sustainable Development Goals
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: MATERIALS, Vol. 17, No. 14, 3519, 16.07.2024.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Experimental Investigations on the Application of Natural Plant Fibers in Ultra-High-Performance Concrete
AU - Joachim, Linus
AU - Oettel, Vincent
N1 - Publisher Copyright: © 2024 by the authors.
PY - 2024/7/16
Y1 - 2024/7/16
N2 - Due to its high strength, the use of ultra-high-performance concrete (UHPC) is particularly suitable for components subjected to compressive loads. Combined with its excellent durability, UHPC can be used to produce highly resource-efficient components that represent a sustainable alternative to conventional load-bearing structures. Since UHPC fails in a brittle manner without the addition of fibers, it is typically used in conjunction with micro steel fibers. The production of these steel fibers is both expensive and energy-intensive. Natural plant fibers, due to their good mechanical properties, cost-effective availability, and inherent CO2 neutrality, can provide a sustainable alternative to conventional steel fibers. Thanks to the low alkaline environment and dense matrix of UHPC, the use of natural plant fibers in terms of durability and bond is possible in principle. For the application of natural plant fibers in UHPC, however, knowledge of the load-bearing and post-cracking behavior or the performance of UHPC reinforced with natural plant fibers is essential. Currently, there are no tests available on the influence of different types of natural plant fibers on the load-bearing behavior of UHPC. Therefore, five series of compression and bending tensile tests were conducted. Three series were reinforced with natural plant fibers (bamboo, coir, and flax), one series without fibers, and one series with steel fibers as a reference. Under compression loads, the test specimens reinforced with natural plant fibers did not fail abruptly and exhibited a comparable post-failure behavior and damage pattern to the reference specimens reinforced with steel fibers. In contrast, the natural plant fibers did not perform as well as the steel fibers under bending tensile stress but did show a certain post-cracking bending tensile strength. A final life cycle assessment demonstrates the superiority of natural plant fibers and shows their positive impact on the environment.
AB - Due to its high strength, the use of ultra-high-performance concrete (UHPC) is particularly suitable for components subjected to compressive loads. Combined with its excellent durability, UHPC can be used to produce highly resource-efficient components that represent a sustainable alternative to conventional load-bearing structures. Since UHPC fails in a brittle manner without the addition of fibers, it is typically used in conjunction with micro steel fibers. The production of these steel fibers is both expensive and energy-intensive. Natural plant fibers, due to their good mechanical properties, cost-effective availability, and inherent CO2 neutrality, can provide a sustainable alternative to conventional steel fibers. Thanks to the low alkaline environment and dense matrix of UHPC, the use of natural plant fibers in terms of durability and bond is possible in principle. For the application of natural plant fibers in UHPC, however, knowledge of the load-bearing and post-cracking behavior or the performance of UHPC reinforced with natural plant fibers is essential. Currently, there are no tests available on the influence of different types of natural plant fibers on the load-bearing behavior of UHPC. Therefore, five series of compression and bending tensile tests were conducted. Three series were reinforced with natural plant fibers (bamboo, coir, and flax), one series without fibers, and one series with steel fibers as a reference. Under compression loads, the test specimens reinforced with natural plant fibers did not fail abruptly and exhibited a comparable post-failure behavior and damage pattern to the reference specimens reinforced with steel fibers. In contrast, the natural plant fibers did not perform as well as the steel fibers under bending tensile stress but did show a certain post-cracking bending tensile strength. A final life cycle assessment demonstrates the superiority of natural plant fibers and shows their positive impact on the environment.
KW - life cycle assessment
KW - natural fiber reinforced concrete
KW - natural plant fibers
KW - performance
KW - post-failure behavior
KW - ultra-high-performance concrete
UR - http://www.scopus.com/inward/record.url?scp=85199777231&partnerID=8YFLogxK
U2 - 10.3390/ma17143519
DO - 10.3390/ma17143519
M3 - Article
AN - SCOPUS:85199777231
VL - 17
JO - MATERIALS
JF - MATERIALS
SN - 1996-1944
IS - 14
M1 - 3519
ER -