Deformation of single crystal hadfield steel by twinning and slip

Research output: Contribution to journalArticleResearchpeer review

Authors

  • I. Karaman
  • H. Sehitoglu
  • K. Gall
  • Y. I. Chumlyakov
  • H. J. Maier

External Research Organisations

  • University of Illinois at Urbana-Champaign
  • University of Colorado Boulder
  • Paderborn University
View graph of relations

Details

Original languageEnglish
Pages (from-to)1345-1359
Number of pages15
JournalActa materialia
Volume48
Issue number6
Publication statusPublished - 2 Apr 2000
Externally publishedYes

Abstract

The stress-strain behavior of Hadfield steel (Fe, 12.34 Mn, 1.03 C, in wt%) single crystals was studied for selected crystallographic orientations ([1̄11], [001] and [1̄23]) under tension and compression. The overall stress-strain response was strongly dependent on the crystallographic orientation and applied stress direction. Transmission electron microscopy and in situ optical microscopy demonstrated that twinning is the dominant deformation mechanism in [1̄11] crystals subjected to tension, and [001] crystals subjected to compression at the onset of inelastic deformation. In the orientations that experience twinning, the activation of multiple twinning systems produces a higher strain-hardening coefficient than observed in typical f.c.c. alloys. Based on these experimental observations, a model is presented that predicts the orientation and stress direction effects on the critical stress for initiating twinning. The model incorporates the role of local pile-up stresses, stacking fault energy, the influence of the applied stress on the separation of partial dislocations, and the increase in the friction stress due to a high solute concentration. On the other hand, multiple slip was determined to be the dominant deformation mechanism in [1̄11] crystals subjected to compression, and [001] crystals deformed under tension. Furthermore, the [1̄23] crystals experience single slip in both tension and compression with planar type dislocations. Using electron back-scattered diffraction patterns, macroscopic shear bands (MSBs) were identified with a misorientation of 9° in the compressed [1̄11] single crystals at strains as low as 1%.

ASJC Scopus subject areas

Cite this

Deformation of single crystal hadfield steel by twinning and slip. / Karaman, I.; Sehitoglu, H.; Gall, K. et al.
In: Acta materialia, Vol. 48, No. 6, 02.04.2000, p. 1345-1359.

Research output: Contribution to journalArticleResearchpeer review

Karaman, I, Sehitoglu, H, Gall, K, Chumlyakov, YI & Maier, HJ 2000, 'Deformation of single crystal hadfield steel by twinning and slip', Acta materialia, vol. 48, no. 6, pp. 1345-1359. https://doi.org/10.1016/S1359-6454(99)00383-3
Karaman I, Sehitoglu H, Gall K, Chumlyakov YI, Maier HJ. Deformation of single crystal hadfield steel by twinning and slip. Acta materialia. 2000 Apr 2;48(6):1345-1359. doi: 10.1016/S1359-6454(99)00383-3
Karaman, I. ; Sehitoglu, H. ; Gall, K. et al. / Deformation of single crystal hadfield steel by twinning and slip. In: Acta materialia. 2000 ; Vol. 48, No. 6. pp. 1345-1359.
Download
@article{a8717e6730d347dfa6edb918a601c046,
title = "Deformation of single crystal hadfield steel by twinning and slip",
abstract = "The stress-strain behavior of Hadfield steel (Fe, 12.34 Mn, 1.03 C, in wt%) single crystals was studied for selected crystallographic orientations ([{\=1}11], [001] and [{\=1}23]) under tension and compression. The overall stress-strain response was strongly dependent on the crystallographic orientation and applied stress direction. Transmission electron microscopy and in situ optical microscopy demonstrated that twinning is the dominant deformation mechanism in [{\=1}11] crystals subjected to tension, and [001] crystals subjected to compression at the onset of inelastic deformation. In the orientations that experience twinning, the activation of multiple twinning systems produces a higher strain-hardening coefficient than observed in typical f.c.c. alloys. Based on these experimental observations, a model is presented that predicts the orientation and stress direction effects on the critical stress for initiating twinning. The model incorporates the role of local pile-up stresses, stacking fault energy, the influence of the applied stress on the separation of partial dislocations, and the increase in the friction stress due to a high solute concentration. On the other hand, multiple slip was determined to be the dominant deformation mechanism in [{\=1}11] crystals subjected to compression, and [001] crystals deformed under tension. Furthermore, the [{\=1}23] crystals experience single slip in both tension and compression with planar type dislocations. Using electron back-scattered diffraction patterns, macroscopic shear bands (MSBs) were identified with a misorientation of 9° in the compressed [{\=1}11] single crystals at strains as low as 1%.",
author = "I. Karaman and H. Sehitoglu and K. Gall and Chumlyakov, {Y. I.} and Maier, {H. J.}",
note = "Funding Information: This work was supported by the National Science Foundation contract CMS 94-14525 and CMS 99-00090, Mechanics and Materials Program, Arlington, Virginia and a supplement from the NSF International Program. Professor Chumlyakov's work received support from the Russian Fund for Basic Researches, Grant No. 02-95-00350. ",
year = "2000",
month = apr,
day = "2",
doi = "10.1016/S1359-6454(99)00383-3",
language = "English",
volume = "48",
pages = "1345--1359",
journal = "Acta materialia",
issn = "1359-6454",
publisher = "Elsevier Ltd.",
number = "6",

}

Download

TY - JOUR

T1 - Deformation of single crystal hadfield steel by twinning and slip

AU - Karaman, I.

AU - Sehitoglu, H.

AU - Gall, K.

AU - Chumlyakov, Y. I.

AU - Maier, H. J.

N1 - Funding Information: This work was supported by the National Science Foundation contract CMS 94-14525 and CMS 99-00090, Mechanics and Materials Program, Arlington, Virginia and a supplement from the NSF International Program. Professor Chumlyakov's work received support from the Russian Fund for Basic Researches, Grant No. 02-95-00350.

PY - 2000/4/2

Y1 - 2000/4/2

N2 - The stress-strain behavior of Hadfield steel (Fe, 12.34 Mn, 1.03 C, in wt%) single crystals was studied for selected crystallographic orientations ([1̄11], [001] and [1̄23]) under tension and compression. The overall stress-strain response was strongly dependent on the crystallographic orientation and applied stress direction. Transmission electron microscopy and in situ optical microscopy demonstrated that twinning is the dominant deformation mechanism in [1̄11] crystals subjected to tension, and [001] crystals subjected to compression at the onset of inelastic deformation. In the orientations that experience twinning, the activation of multiple twinning systems produces a higher strain-hardening coefficient than observed in typical f.c.c. alloys. Based on these experimental observations, a model is presented that predicts the orientation and stress direction effects on the critical stress for initiating twinning. The model incorporates the role of local pile-up stresses, stacking fault energy, the influence of the applied stress on the separation of partial dislocations, and the increase in the friction stress due to a high solute concentration. On the other hand, multiple slip was determined to be the dominant deformation mechanism in [1̄11] crystals subjected to compression, and [001] crystals deformed under tension. Furthermore, the [1̄23] crystals experience single slip in both tension and compression with planar type dislocations. Using electron back-scattered diffraction patterns, macroscopic shear bands (MSBs) were identified with a misorientation of 9° in the compressed [1̄11] single crystals at strains as low as 1%.

AB - The stress-strain behavior of Hadfield steel (Fe, 12.34 Mn, 1.03 C, in wt%) single crystals was studied for selected crystallographic orientations ([1̄11], [001] and [1̄23]) under tension and compression. The overall stress-strain response was strongly dependent on the crystallographic orientation and applied stress direction. Transmission electron microscopy and in situ optical microscopy demonstrated that twinning is the dominant deformation mechanism in [1̄11] crystals subjected to tension, and [001] crystals subjected to compression at the onset of inelastic deformation. In the orientations that experience twinning, the activation of multiple twinning systems produces a higher strain-hardening coefficient than observed in typical f.c.c. alloys. Based on these experimental observations, a model is presented that predicts the orientation and stress direction effects on the critical stress for initiating twinning. The model incorporates the role of local pile-up stresses, stacking fault energy, the influence of the applied stress on the separation of partial dislocations, and the increase in the friction stress due to a high solute concentration. On the other hand, multiple slip was determined to be the dominant deformation mechanism in [1̄11] crystals subjected to compression, and [001] crystals deformed under tension. Furthermore, the [1̄23] crystals experience single slip in both tension and compression with planar type dislocations. Using electron back-scattered diffraction patterns, macroscopic shear bands (MSBs) were identified with a misorientation of 9° in the compressed [1̄11] single crystals at strains as low as 1%.

UR - http://www.scopus.com/inward/record.url?scp=0033884648&partnerID=8YFLogxK

U2 - 10.1016/S1359-6454(99)00383-3

DO - 10.1016/S1359-6454(99)00383-3

M3 - Article

AN - SCOPUS:0033884648

VL - 48

SP - 1345

EP - 1359

JO - Acta materialia

JF - Acta materialia

SN - 1359-6454

IS - 6

ER -

By the same author(s)