Details
| Original language | English |
|---|---|
| Article number | 219 |
| Journal | Lubricants |
| Volume | 13 |
| Issue number | 5 |
| Publication status | Published - 15 May 2025 |
Abstract
Metalworking fluids (MWFs) are crucial in the manufacturing industry, playing a key role in facilitating various production processes. As each machining operation comes with distinct requirements, the properties of the MWFs have to be tailored to meet these specific demands. Understanding the properties of different MWFs is fundamental for optimizing processes and improving performance. This study centered on characterizing the thermal behavior of various cutting oils and water-based cutting fluids over a wide temperature range and sheds light on the specific tribological behavior. The results indicate that water-based fluids exhibit significant shear-thinning behavior, whereas cutting oils maintain nearly Newtonian properties. In terms of frictional performance, cutting oils generally provide better lubrication at higher temperatures, particularly in mixed and full-fluid film regimes, while water-based fluids demonstrate greater friction stability across a wider range of conditions. Among the tested fluids, water-based formulations showed a phase transition from solid to liquid near 0 °C due to their high water content, whereas only a few cutting oils exhibited a similar behavior. Additionally, the thermal conductivity and heat capacity of water-based fluids were substantially higher than those of the cutting oils, contributing to more efficient heat dissipation during machining. These findings, along with the reported data, intend to guide future researchers and industry in selecting the most appropriate cutting fluids for their specific applications and provide valuable input for computational models simulating the influence of MWFs in the primary and secondary shear zones between cutting tools and the workpiece/chiplet.
Keywords
- cutting fluids, differential scanning calorimetry, heat dissipation, laser flash analysis, lubrication, machining, MWF, shear-thinning
ASJC Scopus subject areas
- Engineering(all)
- Mechanical Engineering
- Materials Science(all)
- Surfaces, Coatings and Films
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Lubricants, Vol. 13, No. 5, 219, 15.05.2025.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Comprehensive Evaluation of the Rheological, Tribological, and Thermal Behavior of Cutting Oil and Water-Based Metalworking Fluids
AU - Pape, Florian
AU - Nassef, Belal G.
AU - Schmölzer, Stefan
AU - Stobitzer, Dorothea
AU - Taubmann, Rebekka
AU - Rummel, Florian
AU - Stegmann, Jan
AU - Gerke, Moritz
AU - Marian, Max
AU - Poll, Gerhard
AU - Kabelac, Stephan
N1 - Publisher Copyright: © 2025 by the authors.
PY - 2025/5/15
Y1 - 2025/5/15
N2 - Metalworking fluids (MWFs) are crucial in the manufacturing industry, playing a key role in facilitating various production processes. As each machining operation comes with distinct requirements, the properties of the MWFs have to be tailored to meet these specific demands. Understanding the properties of different MWFs is fundamental for optimizing processes and improving performance. This study centered on characterizing the thermal behavior of various cutting oils and water-based cutting fluids over a wide temperature range and sheds light on the specific tribological behavior. The results indicate that water-based fluids exhibit significant shear-thinning behavior, whereas cutting oils maintain nearly Newtonian properties. In terms of frictional performance, cutting oils generally provide better lubrication at higher temperatures, particularly in mixed and full-fluid film regimes, while water-based fluids demonstrate greater friction stability across a wider range of conditions. Among the tested fluids, water-based formulations showed a phase transition from solid to liquid near 0 °C due to their high water content, whereas only a few cutting oils exhibited a similar behavior. Additionally, the thermal conductivity and heat capacity of water-based fluids were substantially higher than those of the cutting oils, contributing to more efficient heat dissipation during machining. These findings, along with the reported data, intend to guide future researchers and industry in selecting the most appropriate cutting fluids for their specific applications and provide valuable input for computational models simulating the influence of MWFs in the primary and secondary shear zones between cutting tools and the workpiece/chiplet.
AB - Metalworking fluids (MWFs) are crucial in the manufacturing industry, playing a key role in facilitating various production processes. As each machining operation comes with distinct requirements, the properties of the MWFs have to be tailored to meet these specific demands. Understanding the properties of different MWFs is fundamental for optimizing processes and improving performance. This study centered on characterizing the thermal behavior of various cutting oils and water-based cutting fluids over a wide temperature range and sheds light on the specific tribological behavior. The results indicate that water-based fluids exhibit significant shear-thinning behavior, whereas cutting oils maintain nearly Newtonian properties. In terms of frictional performance, cutting oils generally provide better lubrication at higher temperatures, particularly in mixed and full-fluid film regimes, while water-based fluids demonstrate greater friction stability across a wider range of conditions. Among the tested fluids, water-based formulations showed a phase transition from solid to liquid near 0 °C due to their high water content, whereas only a few cutting oils exhibited a similar behavior. Additionally, the thermal conductivity and heat capacity of water-based fluids were substantially higher than those of the cutting oils, contributing to more efficient heat dissipation during machining. These findings, along with the reported data, intend to guide future researchers and industry in selecting the most appropriate cutting fluids for their specific applications and provide valuable input for computational models simulating the influence of MWFs in the primary and secondary shear zones between cutting tools and the workpiece/chiplet.
KW - cutting fluids
KW - differential scanning calorimetry
KW - heat dissipation
KW - laser flash analysis
KW - lubrication
KW - machining
KW - MWF
KW - shear-thinning
UR - http://www.scopus.com/inward/record.url?scp=105006711290&partnerID=8YFLogxK
U2 - 10.3390/lubricants13050219
DO - 10.3390/lubricants13050219
M3 - Article
AN - SCOPUS:105006711290
VL - 13
JO - Lubricants
JF - Lubricants
SN - 2075-4442
IS - 5
M1 - 219
ER -