Application of local fatigue approaches on corroded welded joints with consideration of weld geometry and residual stresses

Research output: Contribution to journalArticleResearchpeer review

Authors

View graph of relations

Details

Original languageEnglish
Article number104215
JournalTheoretical and Applied Fracture Mechanics
Volume129
Early online date29 Nov 2023
Publication statusPublished - Feb 2024

Abstract

Corrosion can significantly affect the fatigue strength of steel structures. On the one hand, it can cause stress concentrations by changing the surface geometry, and on the other hand, it can lead to embrittlement of the material. In welded steel components, sharp notches are already present due to the weld geometry, which may interact with the notches from corrosion. In addition, residual stresses exist in the fatigue-relevant area, which can also be partially modified by surface preparation methods such as clean blasting. In the current standards, all the mentioned effects are considered by reducing the design stress-life (SN) curves, in which all aforementioned effects are superimposed. One possibility to consider the effects separately is the application of local concepts, with which the influence of the geometry, here obtained from 3D-scans, the influence of measured residual stresses, and the influence of material can be considered individually. For butt and fillet welds investigated in this study, it could be shown that by considering the real geometry via a reverse engineered 3D-solid model, the locations of crack initiation in the fatigue tests, measured by digital image correlation (DIC), matched with the numerically predicted locations in most cases. Moreover, it was shown that by taking into account the real geometry and residual stresses, the use of local approaches can result in a substantially reduction of the scatter in SN-curves from T σ = 2.17 to T σ = 1.26, demonstrating the great reliability of the applied method.

Keywords

    Corrosion fatigue, Notch stress approach, Residual stresses, Stress concentrations, Weld geometry

ASJC Scopus subject areas

Cite this

Application of local fatigue approaches on corroded welded joints with consideration of weld geometry and residual stresses. / Shojai, Sulaiman; Brömer, Tim; Ghafoori, Elyas et al.
In: Theoretical and Applied Fracture Mechanics, Vol. 129, 104215, 02.2024.

Research output: Contribution to journalArticleResearchpeer review

Download
@article{28d9babe13a84933976aa951b06e17ef,
title = "Application of local fatigue approaches on corroded welded joints with consideration of weld geometry and residual stresses",
abstract = "Corrosion can significantly affect the fatigue strength of steel structures. On the one hand, it can cause stress concentrations by changing the surface geometry, and on the other hand, it can lead to embrittlement of the material. In welded steel components, sharp notches are already present due to the weld geometry, which may interact with the notches from corrosion. In addition, residual stresses exist in the fatigue-relevant area, which can also be partially modified by surface preparation methods such as clean blasting. In the current standards, all the mentioned effects are considered by reducing the design stress-life (SN) curves, in which all aforementioned effects are superimposed. One possibility to consider the effects separately is the application of local concepts, with which the influence of the geometry, here obtained from 3D-scans, the influence of measured residual stresses, and the influence of material can be considered individually. For butt and fillet welds investigated in this study, it could be shown that by considering the real geometry via a reverse engineered 3D-solid model, the locations of crack initiation in the fatigue tests, measured by digital image correlation (DIC), matched with the numerically predicted locations in most cases. Moreover, it was shown that by taking into account the real geometry and residual stresses, the use of local approaches can result in a substantially reduction of the scatter in SN-curves from T σ = 2.17 to T σ = 1.26, demonstrating the great reliability of the applied method.",
keywords = "Corrosion fatigue, Notch stress approach, Residual stresses, Stress concentrations, Weld geometry",
author = "Sulaiman Shojai and Tim Br{\"o}mer and Elyas Ghafoori and Peter Schaumann",
note = "The authors express their sincere gratitude for the financial support of the research project “Influence of corrosive media on the fatigue strength of offshore wind turbines (CorroFAT)”, grant number 37 LN/1, of the Research Association for Steel Applications (FOSTA) e. V. funded by the German Federal Ministry of Economics and Climate Action (BMWK) via the German Federation of Industrial Research Associations “Otto von Guericke” (AiF) e. V on the basis of a resolution of the German Bundestag.",
year = "2024",
month = feb,
doi = "10.1016/j.tafmec.2023.104215",
language = "English",
volume = "129",
journal = "Theoretical and Applied Fracture Mechanics",
issn = "0167-8442",
publisher = "Elsevier",

}

Download

TY - JOUR

T1 - Application of local fatigue approaches on corroded welded joints with consideration of weld geometry and residual stresses

AU - Shojai, Sulaiman

AU - Brömer, Tim

AU - Ghafoori, Elyas

AU - Schaumann, Peter

N1 - The authors express their sincere gratitude for the financial support of the research project “Influence of corrosive media on the fatigue strength of offshore wind turbines (CorroFAT)”, grant number 37 LN/1, of the Research Association for Steel Applications (FOSTA) e. V. funded by the German Federal Ministry of Economics and Climate Action (BMWK) via the German Federation of Industrial Research Associations “Otto von Guericke” (AiF) e. V on the basis of a resolution of the German Bundestag.

PY - 2024/2

Y1 - 2024/2

N2 - Corrosion can significantly affect the fatigue strength of steel structures. On the one hand, it can cause stress concentrations by changing the surface geometry, and on the other hand, it can lead to embrittlement of the material. In welded steel components, sharp notches are already present due to the weld geometry, which may interact with the notches from corrosion. In addition, residual stresses exist in the fatigue-relevant area, which can also be partially modified by surface preparation methods such as clean blasting. In the current standards, all the mentioned effects are considered by reducing the design stress-life (SN) curves, in which all aforementioned effects are superimposed. One possibility to consider the effects separately is the application of local concepts, with which the influence of the geometry, here obtained from 3D-scans, the influence of measured residual stresses, and the influence of material can be considered individually. For butt and fillet welds investigated in this study, it could be shown that by considering the real geometry via a reverse engineered 3D-solid model, the locations of crack initiation in the fatigue tests, measured by digital image correlation (DIC), matched with the numerically predicted locations in most cases. Moreover, it was shown that by taking into account the real geometry and residual stresses, the use of local approaches can result in a substantially reduction of the scatter in SN-curves from T σ = 2.17 to T σ = 1.26, demonstrating the great reliability of the applied method.

AB - Corrosion can significantly affect the fatigue strength of steel structures. On the one hand, it can cause stress concentrations by changing the surface geometry, and on the other hand, it can lead to embrittlement of the material. In welded steel components, sharp notches are already present due to the weld geometry, which may interact with the notches from corrosion. In addition, residual stresses exist in the fatigue-relevant area, which can also be partially modified by surface preparation methods such as clean blasting. In the current standards, all the mentioned effects are considered by reducing the design stress-life (SN) curves, in which all aforementioned effects are superimposed. One possibility to consider the effects separately is the application of local concepts, with which the influence of the geometry, here obtained from 3D-scans, the influence of measured residual stresses, and the influence of material can be considered individually. For butt and fillet welds investigated in this study, it could be shown that by considering the real geometry via a reverse engineered 3D-solid model, the locations of crack initiation in the fatigue tests, measured by digital image correlation (DIC), matched with the numerically predicted locations in most cases. Moreover, it was shown that by taking into account the real geometry and residual stresses, the use of local approaches can result in a substantially reduction of the scatter in SN-curves from T σ = 2.17 to T σ = 1.26, demonstrating the great reliability of the applied method.

KW - Corrosion fatigue

KW - Notch stress approach

KW - Residual stresses

KW - Stress concentrations

KW - Weld geometry

UR - http://www.scopus.com/inward/record.url?scp=85185833007&partnerID=8YFLogxK

U2 - 10.1016/j.tafmec.2023.104215

DO - 10.1016/j.tafmec.2023.104215

M3 - Article

VL - 129

JO - Theoretical and Applied Fracture Mechanics

JF - Theoretical and Applied Fracture Mechanics

SN - 0167-8442

M1 - 104215

ER -

By the same author(s)