Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 97-103 |
| Seitenumfang | 7 |
| Fachzeitschrift | Materials at high temperatures |
| Jahrgang | 36 |
| Ausgabenummer | 2 |
| Publikationsstatus | Veröffentlicht - 4 Mai 2018 |
Abstract
The focus of this paper is the characterization of the influence of the temperature rates on the TMF lives. Therefore static and the dynamic calibrations of the temperature measurement devices were compared by a custom-built calibration specimen, which included five internal mantle thermocouples. Additionally the temperatures were measured on the specimens’ surface. The experimental setups used were compared by executing TMF pre-test with the identical single-crystalline specimen. Subsequently TMF tests on coated single-crystalline Nickel-based superalloy PWA 1484 were carried out with temperature rates of 10K/s and 20K/s. Finally the deviations of the determined TMF lives were evaluated.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Keramische und Verbundwerkstoffe
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Ingenieurwesen (insg.)
- Maschinenbau
- Werkstoffwissenschaften (insg.)
- Metalle und Legierungen
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Materials at high temperatures, Jahrgang 36, Nr. 2, 04.05.2018, S. 97-103.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - The effect of temperature gradients in thermo-mechanical fatigue testing
AU - Spachtholz, J.
AU - Affeldt, E. E.
AU - Maier, H. J.
AU - Hammer, J.
PY - 2018/5/4
Y1 - 2018/5/4
N2 - The focus of this paper is the characterization of the influence of the temperature rates on the TMF lives. Therefore static and the dynamic calibrations of the temperature measurement devices were compared by a custom-built calibration specimen, which included five internal mantle thermocouples. Additionally the temperatures were measured on the specimens’ surface. The experimental setups used were compared by executing TMF pre-test with the identical single-crystalline specimen. Subsequently TMF tests on coated single-crystalline Nickel-based superalloy PWA 1484 were carried out with temperature rates of 10K/s and 20K/s. Finally the deviations of the determined TMF lives were evaluated.
AB - The focus of this paper is the characterization of the influence of the temperature rates on the TMF lives. Therefore static and the dynamic calibrations of the temperature measurement devices were compared by a custom-built calibration specimen, which included five internal mantle thermocouples. Additionally the temperatures were measured on the specimens’ surface. The experimental setups used were compared by executing TMF pre-test with the identical single-crystalline specimen. Subsequently TMF tests on coated single-crystalline Nickel-based superalloy PWA 1484 were carried out with temperature rates of 10K/s and 20K/s. Finally the deviations of the determined TMF lives were evaluated.
KW - experimental setup
KW - temperature field effect
KW - Thermo-mechanical fatigue (TMF)
UR - http://www.scopus.com/inward/record.url?scp=85046410016&partnerID=8YFLogxK
U2 - 10.1080/09603409.2018.1466500
DO - 10.1080/09603409.2018.1466500
M3 - Article
AN - SCOPUS:85046410016
VL - 36
SP - 97
EP - 103
JO - Materials at high temperatures
JF - Materials at high temperatures
SN - 0960-3409
IS - 2
ER -