Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 432-443 |
| Seitenumfang | 12 |
| Fachzeitschrift | Polymer composites |
| Jahrgang | 44 |
| Ausgabenummer | 1 |
| Publikationsstatus | Veröffentlicht - 3 Jan. 2023 |
Abstract
A closer look was taken at a spray binder and the properties of the preforms made with said binder and non-crimp carbon fiber textiles. First the spray process was analyzed, then T-peel and three point flexural tests were carried out to compare the spray binder to other binder systems. While the spray binder showed higher peel strength than most binders found in literature, the measured flexural strength was lower than the values found for powder.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Keramische und Verbundwerkstoffe
- Chemie (insg.)
- Allgemeine Chemie
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Polymer composites, Jahrgang 44, Nr. 1, 03.01.2023, S. 432-443.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Spray binder for automated preforming
T2 - Spray process and preform properties
AU - Möllers, Hendrik
AU - Schmidt, Carsten
AU - Meiners, Dieter
N1 - Funding Information: The authors would like to thank the federal state of Lower Saxony and the European Regional Development Fund (ERDF) for financial and organizational support of the project AutoBLADE. The binder was supplied free of charge by CTP Advanced Materials. Open Access funding enabled and organized by Projekt DEAL. European Regional Development Fund Funding information
PY - 2023/1/3
Y1 - 2023/1/3
N2 - A closer look was taken at a spray binder and the properties of the preforms made with said binder and non-crimp carbon fiber textiles. First the spray process was analyzed, then T-peel and three point flexural tests were carried out to compare the spray binder to other binder systems. While the spray binder showed higher peel strength than most binders found in literature, the measured flexural strength was lower than the values found for powder.
AB - A closer look was taken at a spray binder and the properties of the preforms made with said binder and non-crimp carbon fiber textiles. First the spray process was analyzed, then T-peel and three point flexural tests were carried out to compare the spray binder to other binder systems. While the spray binder showed higher peel strength than most binders found in literature, the measured flexural strength was lower than the values found for powder.
KW - composites
KW - mechanical testing
KW - processing
KW - thermosets
UR - http://www.scopus.com/inward/record.url?scp=85140219726&partnerID=8YFLogxK
U2 - 10.1002/pc.27107
DO - 10.1002/pc.27107
M3 - Article
AN - SCOPUS:85140219726
VL - 44
SP - 432
EP - 443
JO - Polymer composites
JF - Polymer composites
SN - 0272-8397
IS - 1
ER -