Details
Originalsprache | Englisch |
---|---|
Seiten (von - bis) | 3601-3613 |
Seitenumfang | 13 |
Fachzeitschrift | International Journal of Advanced Manufacturing Technology |
Jahrgang | 124 |
Ausgabenummer | 10 |
Frühes Online-Datum | 11 Jan. 2023 |
Publikationsstatus | Veröffentlicht - Feb. 2023 |
Abstract
Titanium and titanium alloys have high strength at low density, good corrosion resistance and excellent biocompatibility. Therefore, the use of titanium materials is well established in high-performance applications such as aerospace and biomedical. However, titanium and titanium alloys such as Ti–6Al–4 V have low thermal conductivity, exhibit unfavorable chip formation with typical segmented chips and have high chemical affinity to surrounding elements such as oxygen. Tool wear and the properties of the component surface and sub-surface are significantly influenced by the presence of oxygen and resulting chemical interactions. Among other things, chemical reactions such as oxidation occur due to the high temperatures and presence of oxygen. In this work, the chip formation of Ti–6Al–4 V at different cutting speeds in discontinuous orthogonal cutting process under different atmospheres is investigated. A conventional air atmosphere, a pure argon atmosphere and a silane-doped atmosphere were used. The oxygen content of the silane-doped argon atmosphere corresponds to an extremely high vacuum (XHV), which is practically oxygen-free. It was found that chip formation is affected by the surrounding atmosphere. At the cutting speed vc = 80 m/min, non-periodic segmentation is present under oxygen-free atmosphere, while segmental chip formation occurs under air. This is accompanied by up to 16.5% lower feed force under inert gas atmosphere, which is due to reduced friction caused by the use of an oxygen-free atmosphere.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Informatik (insg.)
- Software
- Ingenieurwesen (insg.)
- Maschinenbau
- Informatik (insg.)
- Angewandte Informatik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: International Journal of Advanced Manufacturing Technology, Jahrgang 124, Nr. 10, 02.2023, S. 3601-3613.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Investigation of chip formation of Ti–6Al–4V in oxygen-free atmosphere
AU - Denkena, Berend
AU - Bergmann, Benjamin
AU - Schaper, Florian
N1 - Funding Information: Open Access funding enabled and organized by Projekt DEAL. Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Project-ID 394563137-SFB 1368 (TP-B03).
PY - 2023/2
Y1 - 2023/2
N2 - Titanium and titanium alloys have high strength at low density, good corrosion resistance and excellent biocompatibility. Therefore, the use of titanium materials is well established in high-performance applications such as aerospace and biomedical. However, titanium and titanium alloys such as Ti–6Al–4 V have low thermal conductivity, exhibit unfavorable chip formation with typical segmented chips and have high chemical affinity to surrounding elements such as oxygen. Tool wear and the properties of the component surface and sub-surface are significantly influenced by the presence of oxygen and resulting chemical interactions. Among other things, chemical reactions such as oxidation occur due to the high temperatures and presence of oxygen. In this work, the chip formation of Ti–6Al–4 V at different cutting speeds in discontinuous orthogonal cutting process under different atmospheres is investigated. A conventional air atmosphere, a pure argon atmosphere and a silane-doped atmosphere were used. The oxygen content of the silane-doped argon atmosphere corresponds to an extremely high vacuum (XHV), which is practically oxygen-free. It was found that chip formation is affected by the surrounding atmosphere. At the cutting speed vc = 80 m/min, non-periodic segmentation is present under oxygen-free atmosphere, while segmental chip formation occurs under air. This is accompanied by up to 16.5% lower feed force under inert gas atmosphere, which is due to reduced friction caused by the use of an oxygen-free atmosphere.
AB - Titanium and titanium alloys have high strength at low density, good corrosion resistance and excellent biocompatibility. Therefore, the use of titanium materials is well established in high-performance applications such as aerospace and biomedical. However, titanium and titanium alloys such as Ti–6Al–4 V have low thermal conductivity, exhibit unfavorable chip formation with typical segmented chips and have high chemical affinity to surrounding elements such as oxygen. Tool wear and the properties of the component surface and sub-surface are significantly influenced by the presence of oxygen and resulting chemical interactions. Among other things, chemical reactions such as oxidation occur due to the high temperatures and presence of oxygen. In this work, the chip formation of Ti–6Al–4 V at different cutting speeds in discontinuous orthogonal cutting process under different atmospheres is investigated. A conventional air atmosphere, a pure argon atmosphere and a silane-doped atmosphere were used. The oxygen content of the silane-doped argon atmosphere corresponds to an extremely high vacuum (XHV), which is practically oxygen-free. It was found that chip formation is affected by the surrounding atmosphere. At the cutting speed vc = 80 m/min, non-periodic segmentation is present under oxygen-free atmosphere, while segmental chip formation occurs under air. This is accompanied by up to 16.5% lower feed force under inert gas atmosphere, which is due to reduced friction caused by the use of an oxygen-free atmosphere.
KW - Chip formation
KW - Cutting
KW - Oxygen
KW - Titanium
UR - http://www.scopus.com/inward/record.url?scp=85145944506&partnerID=8YFLogxK
U2 - 10.1007/s00170-022-10655-9
DO - 10.1007/s00170-022-10655-9
M3 - Article
AN - SCOPUS:85145944506
VL - 124
SP - 3601
EP - 3613
JO - International Journal of Advanced Manufacturing Technology
JF - International Journal of Advanced Manufacturing Technology
SN - 0268-3768
IS - 10
ER -