Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 2350936 |
| Seitenumfang | 13 |
| Fachzeitschrift | European Journal of Materials |
| Jahrgang | 4 |
| Ausgabenummer | 1 |
| Frühes Online-Datum | 8 Juni 2024 |
| Publikationsstatus | Veröffentlicht - 2024 |
Abstract
Ultra-hard cutting materials such as polycrystalline diamond (PCD) and cubic boron nitride (PcBN) are increasingly being used as cutting tools in machining. The finishing of cutting tools is challenging due to their mechanical and thermal properties. Both mechanical preparation processes such as grinding and brushing are used to prepare the final contour of the tools. All processes affect the subsurface of the cutting edge, thermally, mechanically, or both. In addition to influencing the cutting edge microgeometry and topography, it is also to be expected that the residual stress state is influenced. In particular for the highly loaded cutting edge, the residual stress state is of major interest, since high cyclic load stresses occur during cutting. A measurement using conventional X-ray diffraction to determine the residual stress state in the cutting edge is not possible due to the very small surface and the strong curvature. For this reason, the influence of the cutting edge preparation methods grinding and brushing for PCD and PcBN on the residual stress state is determined in this work using Raman spectroscopy. For this purpose, the preparation-induced peak shift in the Raman spectrum is determined. This is then converted into absolute residual stresses using previously determined conversion factors.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Werkstoffwissenschaften (sonstige)
- Werkstoffwissenschaften (insg.)
- Biomaterialien
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: European Journal of Materials, Jahrgang 4, Nr. 1, 2350936, 2024.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Influence of the preparation processes on the residual stresses in PCD and PcBN tools
AU - Breidenstein, Bernd
AU - Vogel, Nils
AU - Bergmann, Benjamin
N1 - Publisher Copyright: © 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.
PY - 2024
Y1 - 2024
N2 - Ultra-hard cutting materials such as polycrystalline diamond (PCD) and cubic boron nitride (PcBN) are increasingly being used as cutting tools in machining. The finishing of cutting tools is challenging due to their mechanical and thermal properties. Both mechanical preparation processes such as grinding and brushing are used to prepare the final contour of the tools. All processes affect the subsurface of the cutting edge, thermally, mechanically, or both. In addition to influencing the cutting edge microgeometry and topography, it is also to be expected that the residual stress state is influenced. In particular for the highly loaded cutting edge, the residual stress state is of major interest, since high cyclic load stresses occur during cutting. A measurement using conventional X-ray diffraction to determine the residual stress state in the cutting edge is not possible due to the very small surface and the strong curvature. For this reason, the influence of the cutting edge preparation methods grinding and brushing for PCD and PcBN on the residual stress state is determined in this work using Raman spectroscopy. For this purpose, the preparation-induced peak shift in the Raman spectrum is determined. This is then converted into absolute residual stresses using previously determined conversion factors.
AB - Ultra-hard cutting materials such as polycrystalline diamond (PCD) and cubic boron nitride (PcBN) are increasingly being used as cutting tools in machining. The finishing of cutting tools is challenging due to their mechanical and thermal properties. Both mechanical preparation processes such as grinding and brushing are used to prepare the final contour of the tools. All processes affect the subsurface of the cutting edge, thermally, mechanically, or both. In addition to influencing the cutting edge microgeometry and topography, it is also to be expected that the residual stress state is influenced. In particular for the highly loaded cutting edge, the residual stress state is of major interest, since high cyclic load stresses occur during cutting. A measurement using conventional X-ray diffraction to determine the residual stress state in the cutting edge is not possible due to the very small surface and the strong curvature. For this reason, the influence of the cutting edge preparation methods grinding and brushing for PCD and PcBN on the residual stress state is determined in this work using Raman spectroscopy. For this purpose, the preparation-induced peak shift in the Raman spectrum is determined. This is then converted into absolute residual stresses using previously determined conversion factors.
KW - brushing
KW - grinding
KW - polycrystalline cubic boron nitride
KW - Polycrystalline diamond
KW - residual stresses
UR - http://www.scopus.com/inward/record.url?scp=85195492095&partnerID=8YFLogxK
U2 - 10.1080/26889277.2024.2350936
DO - 10.1080/26889277.2024.2350936
M3 - Article
AN - SCOPUS:85195492095
VL - 4
JO - European Journal of Materials
JF - European Journal of Materials
IS - 1
M1 - 2350936
ER -