Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of the IASTED International Conference on Robotics, Robo 2010 |
| Seiten | 62-68 |
| Seitenumfang | 7 |
| Publikationsstatus | Veröffentlicht - 1 Dez. 2010 |
| Veranstaltung | IASTED International Conference on Robotics, Robo 2010 - Phuket, Thailand Dauer: 24 Nov. 2010 → 26 Nov. 2010 |
Publikationsreihe
| Name | Proceedings of the IASTED International Conference on Robotics, Robo 2010 |
|---|
Abstract
As a result of proceeding globalization the trend of shortening product life cycles goes on. Due to this the machinery and equipment used for manufacturing processes should be designed non-product related, in order to enable them for a further usage in case of product changes. An answer to the problem in the area of part feeding is the aerodynamic centrifuge, which separates parts in a pre-orientation. The operation of the aerodynamic centrifuge is similar to the mechanic centrifugal bowl feeder, but the movement of the workpieces is carried out exclusively by air. In a cylinder the air is set into rotation by a fan. The airflow affects the workpieces in the cylinder and brings them into a rotating motion. The force impacting the workpieces pushes them against the cylinder wall. On this wall a spiral coil is attached which leads the parts upwards. Depending on the shape and other characteristics the workpieces are moved in defined orientations through the airflow and transported predominantly in this position on the spiral coil. At the upper end of the transport route an outlet is installed, through which the workpieces leave the system separately.
ASJC Scopus Sachgebiete
- Informatik (insg.)
- Artificial intelligence
- Informatik (insg.)
- Maschinelles Sehen und Mustererkennung
- Informatik (insg.)
- Mensch-Maschine-Interaktion
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the IASTED International Conference on Robotics, Robo 2010. 2010. S. 62-68 (Proceedings of the IASTED International Conference on Robotics, Robo 2010).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Flexible part feeding with the aerodynmamic centrifuge
T2 - IASTED International Conference on Robotics, Robo 2010
AU - Frädrich, Thomas
AU - Nyhuis, Peter
PY - 2010/12/1
Y1 - 2010/12/1
N2 - As a result of proceeding globalization the trend of shortening product life cycles goes on. Due to this the machinery and equipment used for manufacturing processes should be designed non-product related, in order to enable them for a further usage in case of product changes. An answer to the problem in the area of part feeding is the aerodynamic centrifuge, which separates parts in a pre-orientation. The operation of the aerodynamic centrifuge is similar to the mechanic centrifugal bowl feeder, but the movement of the workpieces is carried out exclusively by air. In a cylinder the air is set into rotation by a fan. The airflow affects the workpieces in the cylinder and brings them into a rotating motion. The force impacting the workpieces pushes them against the cylinder wall. On this wall a spiral coil is attached which leads the parts upwards. Depending on the shape and other characteristics the workpieces are moved in defined orientations through the airflow and transported predominantly in this position on the spiral coil. At the upper end of the transport route an outlet is installed, through which the workpieces leave the system separately.
AB - As a result of proceeding globalization the trend of shortening product life cycles goes on. Due to this the machinery and equipment used for manufacturing processes should be designed non-product related, in order to enable them for a further usage in case of product changes. An answer to the problem in the area of part feeding is the aerodynamic centrifuge, which separates parts in a pre-orientation. The operation of the aerodynamic centrifuge is similar to the mechanic centrifugal bowl feeder, but the movement of the workpieces is carried out exclusively by air. In a cylinder the air is set into rotation by a fan. The airflow affects the workpieces in the cylinder and brings them into a rotating motion. The force impacting the workpieces pushes them against the cylinder wall. On this wall a spiral coil is attached which leads the parts upwards. Depending on the shape and other characteristics the workpieces are moved in defined orientations through the airflow and transported predominantly in this position on the spiral coil. At the upper end of the transport route an outlet is installed, through which the workpieces leave the system separately.
KW - Assembly systems
KW - Automation and manufacturing
KW - Part feeding
KW - Part orientation
KW - Part separation
UR - http://www.scopus.com/inward/record.url?scp=79955979288&partnerID=8YFLogxK
U2 - 10.2316/P.2010.703-003
DO - 10.2316/P.2010.703-003
M3 - Conference contribution
AN - SCOPUS:79955979288
SN - 9780889868595
T3 - Proceedings of the IASTED International Conference on Robotics, Robo 2010
SP - 62
EP - 68
BT - Proceedings of the IASTED International Conference on Robotics, Robo 2010
Y2 - 24 November 2010 through 26 November 2010
ER -