Experimental study on ECC-based unreinforced shield tunnel segmental joints for future resilient infrastructure

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autorschaft

Externe Organisationen

  • Tongji University
  • State Key Laboratory for Disaster Reduction of Civil Engineering
  • Bauhaus-Universität Weimar
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)283-310
Seitenumfang28
FachzeitschriftUnderground Space (new)
Jahrgang24
Frühes Online-Datum23 Juli 2025
PublikationsstatusVeröffentlicht - Okt. 2025

Abstract

To advance resilient infrastructure, this study explores unreinforced shield tunnel segment technologies, a critical but under-researched area. It conducted experiments on ECC-based unreinforced segments (ECCUS), comparing them with ECC-based reinforced segments (ECCRS) and reinforced concrete segments (RCS), focusing on their mechanical properties, including material characteristics, segmental deflection, joint behavior, bolt strain, damage propagation, failure modes, joint toughness, and ductility. Key findings include: (1) ECCUS joints exhibited significantly enhanced bearing capacity, with ultimate strength 34% higher than RCS and 29% higher than ECCRS. In terms of initial cracking strength, ECCUS outperformed RCS by 200% and ECCRS by 34%. (2) The absence of reinforcement cages in ECCUS reduced stiffness but improved overall segment coordination and deformation, leading to deflections 100% greater than RCS and 85% than ECCRS. (3) ECCUS and ECCRS displayed numerous, fine cracks under 200 µm wide, while RCS showed fewer, wider cracks over 3 mm, leading to significant spalling. Cracks in ECCUS were densely distributed across shear and compression zones, in contrast to RCS and ECCRS where they concentrated on compression areas. (4) ECCUS joints exhibited remarkable toughness, with elastic phase toughness 13.47 times that of RCS and 1.91 times that of ECCRS. In the normal serviceability phase, the toughness of ECCUS was 12.17 times that of RCS and 2.53 times that of ECCRS. (5) Considering multi-scale mechanical effects, ECCUS joints amplified the material advantages of ECC over RC more than 11 times during the elastic stage. These findings offer valuable insights for future resilient infrastructure development based on unreinforced construction technologies.

ASJC Scopus Sachgebiete

Ziele für nachhaltige Entwicklung

Zitieren

Experimental study on ECC-based unreinforced shield tunnel segmental joints for future resilient infrastructure. / Cai, Minjin; Rabczuk, Timon; Zhuang, Xiaoying.
in: Underground Space (new), Jahrgang 24, 10.2025, S. 283-310.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Cai M, Rabczuk T, Zhuang X. Experimental study on ECC-based unreinforced shield tunnel segmental joints for future resilient infrastructure. Underground Space (new). 2025 Okt;24:283-310. Epub 2025 Jul 23. doi: 10.1016/j.undsp.2024.09.009
Cai, Minjin ; Rabczuk, Timon ; Zhuang, Xiaoying. / Experimental study on ECC-based unreinforced shield tunnel segmental joints for future resilient infrastructure. in: Underground Space (new). 2025 ; Jahrgang 24. S. 283-310.
Download
@article{42467a1e9c5d499bbf06ed65b07c4a66,
title = "Experimental study on ECC-based unreinforced shield tunnel segmental joints for future resilient infrastructure",
abstract = "To advance resilient infrastructure, this study explores unreinforced shield tunnel segment technologies, a critical but under-researched area. It conducted experiments on ECC-based unreinforced segments (ECCUS), comparing them with ECC-based reinforced segments (ECCRS) and reinforced concrete segments (RCS), focusing on their mechanical properties, including material characteristics, segmental deflection, joint behavior, bolt strain, damage propagation, failure modes, joint toughness, and ductility. Key findings include: (1) ECCUS joints exhibited significantly enhanced bearing capacity, with ultimate strength 34% higher than RCS and 29% higher than ECCRS. In terms of initial cracking strength, ECCUS outperformed RCS by 200% and ECCRS by 34%. (2) The absence of reinforcement cages in ECCUS reduced stiffness but improved overall segment coordination and deformation, leading to deflections 100% greater than RCS and 85% than ECCRS. (3) ECCUS and ECCRS displayed numerous, fine cracks under 200 µm wide, while RCS showed fewer, wider cracks over 3 mm, leading to significant spalling. Cracks in ECCUS were densely distributed across shear and compression zones, in contrast to RCS and ECCRS where they concentrated on compression areas. (4) ECCUS joints exhibited remarkable toughness, with elastic phase toughness 13.47 times that of RCS and 1.91 times that of ECCRS. In the normal serviceability phase, the toughness of ECCUS was 12.17 times that of RCS and 2.53 times that of ECCRS. (5) Considering multi-scale mechanical effects, ECCUS joints amplified the material advantages of ECC over RC more than 11 times during the elastic stage. These findings offer valuable insights for future resilient infrastructure development based on unreinforced construction technologies.",
keywords = "ECC, ECC-based segment, Resilient infrastructure, Unreinforced shield tunnel",
author = "Minjin Cai and Timon Rabczuk and Xiaoying Zhuang",
note = "Publisher Copyright: {\textcopyright} 2025 Tongji University",
year = "2025",
month = oct,
doi = "10.1016/j.undsp.2024.09.009",
language = "English",
volume = "24",
pages = "283--310",

}

Download

TY - JOUR

T1 - Experimental study on ECC-based unreinforced shield tunnel segmental joints for future resilient infrastructure

AU - Cai, Minjin

AU - Rabczuk, Timon

AU - Zhuang, Xiaoying

N1 - Publisher Copyright: © 2025 Tongji University

PY - 2025/10

Y1 - 2025/10

N2 - To advance resilient infrastructure, this study explores unreinforced shield tunnel segment technologies, a critical but under-researched area. It conducted experiments on ECC-based unreinforced segments (ECCUS), comparing them with ECC-based reinforced segments (ECCRS) and reinforced concrete segments (RCS), focusing on their mechanical properties, including material characteristics, segmental deflection, joint behavior, bolt strain, damage propagation, failure modes, joint toughness, and ductility. Key findings include: (1) ECCUS joints exhibited significantly enhanced bearing capacity, with ultimate strength 34% higher than RCS and 29% higher than ECCRS. In terms of initial cracking strength, ECCUS outperformed RCS by 200% and ECCRS by 34%. (2) The absence of reinforcement cages in ECCUS reduced stiffness but improved overall segment coordination and deformation, leading to deflections 100% greater than RCS and 85% than ECCRS. (3) ECCUS and ECCRS displayed numerous, fine cracks under 200 µm wide, while RCS showed fewer, wider cracks over 3 mm, leading to significant spalling. Cracks in ECCUS were densely distributed across shear and compression zones, in contrast to RCS and ECCRS where they concentrated on compression areas. (4) ECCUS joints exhibited remarkable toughness, with elastic phase toughness 13.47 times that of RCS and 1.91 times that of ECCRS. In the normal serviceability phase, the toughness of ECCUS was 12.17 times that of RCS and 2.53 times that of ECCRS. (5) Considering multi-scale mechanical effects, ECCUS joints amplified the material advantages of ECC over RC more than 11 times during the elastic stage. These findings offer valuable insights for future resilient infrastructure development based on unreinforced construction technologies.

AB - To advance resilient infrastructure, this study explores unreinforced shield tunnel segment technologies, a critical but under-researched area. It conducted experiments on ECC-based unreinforced segments (ECCUS), comparing them with ECC-based reinforced segments (ECCRS) and reinforced concrete segments (RCS), focusing on their mechanical properties, including material characteristics, segmental deflection, joint behavior, bolt strain, damage propagation, failure modes, joint toughness, and ductility. Key findings include: (1) ECCUS joints exhibited significantly enhanced bearing capacity, with ultimate strength 34% higher than RCS and 29% higher than ECCRS. In terms of initial cracking strength, ECCUS outperformed RCS by 200% and ECCRS by 34%. (2) The absence of reinforcement cages in ECCUS reduced stiffness but improved overall segment coordination and deformation, leading to deflections 100% greater than RCS and 85% than ECCRS. (3) ECCUS and ECCRS displayed numerous, fine cracks under 200 µm wide, while RCS showed fewer, wider cracks over 3 mm, leading to significant spalling. Cracks in ECCUS were densely distributed across shear and compression zones, in contrast to RCS and ECCRS where they concentrated on compression areas. (4) ECCUS joints exhibited remarkable toughness, with elastic phase toughness 13.47 times that of RCS and 1.91 times that of ECCRS. In the normal serviceability phase, the toughness of ECCUS was 12.17 times that of RCS and 2.53 times that of ECCRS. (5) Considering multi-scale mechanical effects, ECCUS joints amplified the material advantages of ECC over RC more than 11 times during the elastic stage. These findings offer valuable insights for future resilient infrastructure development based on unreinforced construction technologies.

KW - ECC

KW - ECC-based segment

KW - Resilient infrastructure

KW - Unreinforced shield tunnel

UR - http://www.scopus.com/inward/record.url?scp=105013674056&partnerID=8YFLogxK

U2 - 10.1016/j.undsp.2024.09.009

DO - 10.1016/j.undsp.2024.09.009

M3 - Article

AN - SCOPUS:105013674056

VL - 24

SP - 283

EP - 310

JO - Underground Space (new)

JF - Underground Space (new)

SN - 2096-2754

ER -

Von denselben Autoren