Comparison of dynamic cobble berm revetments with differing gravel characteristics

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Ollie Foss
  • Chris E. Blenkinsopp
  • Paul M. Bayle
  • Kévin Martins
  • Stefan Schimmels
  • Luis Pedro Almeida

Organisationseinheiten

Externe Organisationen

  • University of Bath
  • Delft University of Technology
  • Universite de Bordeaux
  • Fundacao Universidade Federal do Rio Grande
  • +ATLANTIC LVT
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Aufsatznummer104312
FachzeitschriftCoastal engineering
Jahrgang183
Frühes Online-Datum21 Apr. 2023
PublikationsstatusVeröffentlicht - Aug. 2023

Abstract

Pressure on the coastline is escalating due to the impacts of climate change, this is leading to a rise in sea-levels and intensifying storminess. Consequently, many regions of the coast are at increased risk of erosion and flooding. Therefore coastal protection schemes will increase in cost and scale. In response there is a growing use of nature-based coastal protection which aim to be sustainable, effective and adaptable. An example of a nature-based solution is a dynamic cobble berm revetment: a berm constructed from cobble and other gravel sediments at the high tide wave runup limit. These structures limit wave excursion protecting the hinterland from inundation, stabilise the upper beach and adapt to changes in water level. Recent experiments and field applications have shown the suitability of these structures for coastal protection, however many of the processes and design considerations are poorly understood. This study directly compares two prototype scale laboratory experiments which tested dynamic cobble berm revetments constructed with approximately the same geometry but differing gravel characteristics; well-sorted rounded gravel (DynaRev1) and poorly-sorted angular gravel (DynaRev2). In both cases the structures were tested using identical wave forcing including incrementally increasing water level and erosive wave conditions. The results presented in this paper demonstrate that both designs responded to changing water level and wave conditions by approaching a dynamically stable state, where individual gravel is mobilised under wave action but the geometry remains approximately constant. Further, both structures acted to reduce swash excursions compared to a pure sand beach. However, their morphological behaviour is response to wave action varied considerably. Once overtopping of the designed crest occurred, the poorly-sorted revetment developed a peaked crest which grew in elevation as the water level or wave height increased, further limited overtopping. By comparison, the well-sorted revetment was characterised by a larger volume of submerged gravel and a lower elevation flat crest which responded less well to changes in conditions. This occurred due to two processes: (1) for the poorly-sorted case, gravel sorting processes moved small to medium gravel material (D50<70mm) to the crest and (2) the angular nature of the poorly-sorted gravel material promoted increased interlocking. Both of these processes led to a gravel matrix that is more resistant to wave action and gravitational effects. Both revetments experienced some sinking due to sand erosion beneath the front slope. The rate of sinking for the well-sorted case was larger and continued throughout due to the large pore spaces within the gravel matrix. For the poorly sorted revetment in DynaRev2, sand erosion ceased after approximately 28 h due to the development of a filter layer of small gravel at the sand-gravel interface reducing porosity at this location, hence a larger volume of sand was preserved beneath the structure. Both designs present a low-cost and effective solution for protecting sandy coastlines but from an engineering viewpoint it appears better to avoid well-sorted gravel material and greater gravel angularity has been seen to increase crest stability.

ASJC Scopus Sachgebiete

Ziele für nachhaltige Entwicklung

Zitieren

Comparison of dynamic cobble berm revetments with differing gravel characteristics. / Foss, Ollie; Blenkinsopp, Chris E.; Bayle, Paul M. et al.
in: Coastal engineering, Jahrgang 183, 104312, 08.2023.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Foss, O, Blenkinsopp, CE, Bayle, PM, Martins, K, Schimmels, S & Almeida, LP 2023, 'Comparison of dynamic cobble berm revetments with differing gravel characteristics', Coastal engineering, Jg. 183, 104312. https://doi.org/10.1016/j.coastaleng.2023.104312
Foss, O., Blenkinsopp, C. E., Bayle, P. M., Martins, K., Schimmels, S., & Almeida, L. P. (2023). Comparison of dynamic cobble berm revetments with differing gravel characteristics. Coastal engineering, 183, Artikel 104312. https://doi.org/10.1016/j.coastaleng.2023.104312
Foss O, Blenkinsopp CE, Bayle PM, Martins K, Schimmels S, Almeida LP. Comparison of dynamic cobble berm revetments with differing gravel characteristics. Coastal engineering. 2023 Aug;183:104312. Epub 2023 Apr 21. doi: 10.1016/j.coastaleng.2023.104312
Foss, Ollie ; Blenkinsopp, Chris E. ; Bayle, Paul M. et al. / Comparison of dynamic cobble berm revetments with differing gravel characteristics. in: Coastal engineering. 2023 ; Jahrgang 183.
Download
@article{363534932b5648f2bec6d4eff9352d68,
title = "Comparison of dynamic cobble berm revetments with differing gravel characteristics",
abstract = "Pressure on the coastline is escalating due to the impacts of climate change, this is leading to a rise in sea-levels and intensifying storminess. Consequently, many regions of the coast are at increased risk of erosion and flooding. Therefore coastal protection schemes will increase in cost and scale. In response there is a growing use of nature-based coastal protection which aim to be sustainable, effective and adaptable. An example of a nature-based solution is a dynamic cobble berm revetment: a berm constructed from cobble and other gravel sediments at the high tide wave runup limit. These structures limit wave excursion protecting the hinterland from inundation, stabilise the upper beach and adapt to changes in water level. Recent experiments and field applications have shown the suitability of these structures for coastal protection, however many of the processes and design considerations are poorly understood. This study directly compares two prototype scale laboratory experiments which tested dynamic cobble berm revetments constructed with approximately the same geometry but differing gravel characteristics; well-sorted rounded gravel (DynaRev1) and poorly-sorted angular gravel (DynaRev2). In both cases the structures were tested using identical wave forcing including incrementally increasing water level and erosive wave conditions. The results presented in this paper demonstrate that both designs responded to changing water level and wave conditions by approaching a dynamically stable state, where individual gravel is mobilised under wave action but the geometry remains approximately constant. Further, both structures acted to reduce swash excursions compared to a pure sand beach. However, their morphological behaviour is response to wave action varied considerably. Once overtopping of the designed crest occurred, the poorly-sorted revetment developed a peaked crest which grew in elevation as the water level or wave height increased, further limited overtopping. By comparison, the well-sorted revetment was characterised by a larger volume of submerged gravel and a lower elevation flat crest which responded less well to changes in conditions. This occurred due to two processes: (1) for the poorly-sorted case, gravel sorting processes moved small to medium gravel material (D50<70mm) to the crest and (2) the angular nature of the poorly-sorted gravel material promoted increased interlocking. Both of these processes led to a gravel matrix that is more resistant to wave action and gravitational effects. Both revetments experienced some sinking due to sand erosion beneath the front slope. The rate of sinking for the well-sorted case was larger and continued throughout due to the large pore spaces within the gravel matrix. For the poorly sorted revetment in DynaRev2, sand erosion ceased after approximately 28 h due to the development of a filter layer of small gravel at the sand-gravel interface reducing porosity at this location, hence a larger volume of sand was preserved beneath the structure. Both designs present a low-cost and effective solution for protecting sandy coastlines but from an engineering viewpoint it appears better to avoid well-sorted gravel material and greater gravel angularity has been seen to increase crest stability.",
keywords = "Coastal adaption, Dynamic cobble berm revetment, Dynamic revetment, DynaRev, Gravel characteristics, Nature based solutions",
author = "Ollie Foss and Blenkinsopp, {Chris E.} and Bayle, {Paul M.} and K{\'e}vin Martins and Stefan Schimmels and Almeida, {Luis Pedro}",
note = "Funding Information: Funding: The DynaRev1 project received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 654110, HYDRALAB+. The DynaRev2 project received funding from the Research England Global Challenges Research Fund. Ollie Foss and Paul Bayle were supported by a PhD scholarship through the EPSRC CDT in Water Informatics: Science and Engineering (WISE). K{\'e}vin Martins acknowledges financial support from the University of Bordeaux, France, through an International Postdoctoral Grant (Idex, nb. 1024R-5030). The authors would like to sincerely thank Matthias Kudella and all the staff at the Gro{\ss}ber WellenKanal (GWK) for their support before, during and after both experiments. Additionally the authors acknowledge all colleagues who contributed to the DynaRev1 experiment. Funding Information: Funding: The DynaRev1 project received funding from the European Union{\textquoteright}s Horizon 2020 research and innovation programme under grant agreement No 654110 , HYDRALAB+. The DynaRev2 project received funding from the Research England Global Challenges Research Fund . Ollie Foss and Paul Bayle were supported by a PhD scholarship through the EPSRC CDT in Water Informatics: Science and Engineering (WISE) . K{\'e}vin Martins acknowledges financial support from the University of Bordeaux, France , through an International Postdoctoral Grant (Idex, nb. 1024R-5030 ). The authors would like to sincerely thank Matthias Kudella and all the staff at the Gro{\ss}ber WellenKanal (GWK) for their support before, during and after both experiments. Additionally the authors acknowledge all colleagues who contributed to the DynaRev1 experiment.",
year = "2023",
month = aug,
doi = "10.1016/j.coastaleng.2023.104312",
language = "English",
volume = "183",
journal = "Coastal engineering",
issn = "0378-3839",
publisher = "Elsevier",

}

Download

TY - JOUR

T1 - Comparison of dynamic cobble berm revetments with differing gravel characteristics

AU - Foss, Ollie

AU - Blenkinsopp, Chris E.

AU - Bayle, Paul M.

AU - Martins, Kévin

AU - Schimmels, Stefan

AU - Almeida, Luis Pedro

N1 - Funding Information: Funding: The DynaRev1 project received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 654110, HYDRALAB+. The DynaRev2 project received funding from the Research England Global Challenges Research Fund. Ollie Foss and Paul Bayle were supported by a PhD scholarship through the EPSRC CDT in Water Informatics: Science and Engineering (WISE). Kévin Martins acknowledges financial support from the University of Bordeaux, France, through an International Postdoctoral Grant (Idex, nb. 1024R-5030). The authors would like to sincerely thank Matthias Kudella and all the staff at the Großber WellenKanal (GWK) for their support before, during and after both experiments. Additionally the authors acknowledge all colleagues who contributed to the DynaRev1 experiment. Funding Information: Funding: The DynaRev1 project received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 654110 , HYDRALAB+. The DynaRev2 project received funding from the Research England Global Challenges Research Fund . Ollie Foss and Paul Bayle were supported by a PhD scholarship through the EPSRC CDT in Water Informatics: Science and Engineering (WISE) . Kévin Martins acknowledges financial support from the University of Bordeaux, France , through an International Postdoctoral Grant (Idex, nb. 1024R-5030 ). The authors would like to sincerely thank Matthias Kudella and all the staff at the Großber WellenKanal (GWK) for their support before, during and after both experiments. Additionally the authors acknowledge all colleagues who contributed to the DynaRev1 experiment.

PY - 2023/8

Y1 - 2023/8

N2 - Pressure on the coastline is escalating due to the impacts of climate change, this is leading to a rise in sea-levels and intensifying storminess. Consequently, many regions of the coast are at increased risk of erosion and flooding. Therefore coastal protection schemes will increase in cost and scale. In response there is a growing use of nature-based coastal protection which aim to be sustainable, effective and adaptable. An example of a nature-based solution is a dynamic cobble berm revetment: a berm constructed from cobble and other gravel sediments at the high tide wave runup limit. These structures limit wave excursion protecting the hinterland from inundation, stabilise the upper beach and adapt to changes in water level. Recent experiments and field applications have shown the suitability of these structures for coastal protection, however many of the processes and design considerations are poorly understood. This study directly compares two prototype scale laboratory experiments which tested dynamic cobble berm revetments constructed with approximately the same geometry but differing gravel characteristics; well-sorted rounded gravel (DynaRev1) and poorly-sorted angular gravel (DynaRev2). In both cases the structures were tested using identical wave forcing including incrementally increasing water level and erosive wave conditions. The results presented in this paper demonstrate that both designs responded to changing water level and wave conditions by approaching a dynamically stable state, where individual gravel is mobilised under wave action but the geometry remains approximately constant. Further, both structures acted to reduce swash excursions compared to a pure sand beach. However, their morphological behaviour is response to wave action varied considerably. Once overtopping of the designed crest occurred, the poorly-sorted revetment developed a peaked crest which grew in elevation as the water level or wave height increased, further limited overtopping. By comparison, the well-sorted revetment was characterised by a larger volume of submerged gravel and a lower elevation flat crest which responded less well to changes in conditions. This occurred due to two processes: (1) for the poorly-sorted case, gravel sorting processes moved small to medium gravel material (D50<70mm) to the crest and (2) the angular nature of the poorly-sorted gravel material promoted increased interlocking. Both of these processes led to a gravel matrix that is more resistant to wave action and gravitational effects. Both revetments experienced some sinking due to sand erosion beneath the front slope. The rate of sinking for the well-sorted case was larger and continued throughout due to the large pore spaces within the gravel matrix. For the poorly sorted revetment in DynaRev2, sand erosion ceased after approximately 28 h due to the development of a filter layer of small gravel at the sand-gravel interface reducing porosity at this location, hence a larger volume of sand was preserved beneath the structure. Both designs present a low-cost and effective solution for protecting sandy coastlines but from an engineering viewpoint it appears better to avoid well-sorted gravel material and greater gravel angularity has been seen to increase crest stability.

AB - Pressure on the coastline is escalating due to the impacts of climate change, this is leading to a rise in sea-levels and intensifying storminess. Consequently, many regions of the coast are at increased risk of erosion and flooding. Therefore coastal protection schemes will increase in cost and scale. In response there is a growing use of nature-based coastal protection which aim to be sustainable, effective and adaptable. An example of a nature-based solution is a dynamic cobble berm revetment: a berm constructed from cobble and other gravel sediments at the high tide wave runup limit. These structures limit wave excursion protecting the hinterland from inundation, stabilise the upper beach and adapt to changes in water level. Recent experiments and field applications have shown the suitability of these structures for coastal protection, however many of the processes and design considerations are poorly understood. This study directly compares two prototype scale laboratory experiments which tested dynamic cobble berm revetments constructed with approximately the same geometry but differing gravel characteristics; well-sorted rounded gravel (DynaRev1) and poorly-sorted angular gravel (DynaRev2). In both cases the structures were tested using identical wave forcing including incrementally increasing water level and erosive wave conditions. The results presented in this paper demonstrate that both designs responded to changing water level and wave conditions by approaching a dynamically stable state, where individual gravel is mobilised under wave action but the geometry remains approximately constant. Further, both structures acted to reduce swash excursions compared to a pure sand beach. However, their morphological behaviour is response to wave action varied considerably. Once overtopping of the designed crest occurred, the poorly-sorted revetment developed a peaked crest which grew in elevation as the water level or wave height increased, further limited overtopping. By comparison, the well-sorted revetment was characterised by a larger volume of submerged gravel and a lower elevation flat crest which responded less well to changes in conditions. This occurred due to two processes: (1) for the poorly-sorted case, gravel sorting processes moved small to medium gravel material (D50<70mm) to the crest and (2) the angular nature of the poorly-sorted gravel material promoted increased interlocking. Both of these processes led to a gravel matrix that is more resistant to wave action and gravitational effects. Both revetments experienced some sinking due to sand erosion beneath the front slope. The rate of sinking for the well-sorted case was larger and continued throughout due to the large pore spaces within the gravel matrix. For the poorly sorted revetment in DynaRev2, sand erosion ceased after approximately 28 h due to the development of a filter layer of small gravel at the sand-gravel interface reducing porosity at this location, hence a larger volume of sand was preserved beneath the structure. Both designs present a low-cost and effective solution for protecting sandy coastlines but from an engineering viewpoint it appears better to avoid well-sorted gravel material and greater gravel angularity has been seen to increase crest stability.

KW - Coastal adaption

KW - Dynamic cobble berm revetment

KW - Dynamic revetment

KW - DynaRev

KW - Gravel characteristics

KW - Nature based solutions

UR - http://www.scopus.com/inward/record.url?scp=85159227260&partnerID=8YFLogxK

U2 - 10.1016/j.coastaleng.2023.104312

DO - 10.1016/j.coastaleng.2023.104312

M3 - Article

AN - SCOPUS:85159227260

VL - 183

JO - Coastal engineering

JF - Coastal engineering

SN - 0378-3839

M1 - 104312

ER -