Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 101473 |
| Fachzeitschrift | Energy Conversion and Management: X |
| Jahrgang | 29 |
| Frühes Online-Datum | 18 Dez. 2025 |
| Publikationsstatus | Veröffentlicht - Jan. 2026 |
Abstract
This work compares the operational flexibility, energy capacity and efficiency of four standard pumped hydro storage configurations in a 100 MW and 10 h system. The analysis applies two technology options for enhanced flexibility to these configurations: variable-speed operation and hydraulic short circuit (HSC). To simulate system behaviour, a detailed physical model is developed that captures off-design performance, dynamic head variation, and is validated with original equipment manufacturer data. Variable speed enables an operating window around the pump's nominal charging power with limited efficiency penalties, increasing operating-range coverage from 31.5% to 50.5% in a single binary set. HSC operation enables flexibility in deep part-load charging; the operating-range coverage rises from 33.8% to 55.1% in a single ternary set and to 89% in two ternary sets compared with 42.3% without HSC. HSC system efficiency is much lower due to counter-acting power flows and can reach zero even while the individual component efficiencies remain high. Ragone plot analysis is used to quantify the energy capacity at different power levels and shows that high-power HSC charging is prematurely terminated by turbine flow constraints. Advanced flexibility combinations of variable speed and HSC demonstrate potential since their characteristics complement each other, increasing the operating range from 42.2% to 71.8% in the single binary machine set configuration.
ASJC Scopus Sachgebiete
- Energie (insg.)
- Erneuerbare Energien, Nachhaltigkeit und Umwelt
- Energie (insg.)
- Kernenergie und Kernkraftwerkstechnik
- Energie (insg.)
- Feuerungstechnik
- Energie (insg.)
- Energieanlagenbau und Kraftwerkstechnik
Ziele für nachhaltige Entwicklung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Energy Conversion and Management: X, Jahrgang 29, 101473, 01.2026.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Comparing operational flexibility and performance of pumped hydro energy storage systems
T2 - A quantitative analysis of technology options
AU - Beyers, Inga
AU - Krebeck, Lukas
AU - Bensmann, Astrid
AU - Hanke-Rauschenbach, Richard
N1 - Publisher Copyright: © 2025 The Authors
PY - 2026/1
Y1 - 2026/1
N2 - This work compares the operational flexibility, energy capacity and efficiency of four standard pumped hydro storage configurations in a 100 MW and 10 h system. The analysis applies two technology options for enhanced flexibility to these configurations: variable-speed operation and hydraulic short circuit (HSC). To simulate system behaviour, a detailed physical model is developed that captures off-design performance, dynamic head variation, and is validated with original equipment manufacturer data. Variable speed enables an operating window around the pump's nominal charging power with limited efficiency penalties, increasing operating-range coverage from 31.5% to 50.5% in a single binary set. HSC operation enables flexibility in deep part-load charging; the operating-range coverage rises from 33.8% to 55.1% in a single ternary set and to 89% in two ternary sets compared with 42.3% without HSC. HSC system efficiency is much lower due to counter-acting power flows and can reach zero even while the individual component efficiencies remain high. Ragone plot analysis is used to quantify the energy capacity at different power levels and shows that high-power HSC charging is prematurely terminated by turbine flow constraints. Advanced flexibility combinations of variable speed and HSC demonstrate potential since their characteristics complement each other, increasing the operating range from 42.2% to 71.8% in the single binary machine set configuration.
AB - This work compares the operational flexibility, energy capacity and efficiency of four standard pumped hydro storage configurations in a 100 MW and 10 h system. The analysis applies two technology options for enhanced flexibility to these configurations: variable-speed operation and hydraulic short circuit (HSC). To simulate system behaviour, a detailed physical model is developed that captures off-design performance, dynamic head variation, and is validated with original equipment manufacturer data. Variable speed enables an operating window around the pump's nominal charging power with limited efficiency penalties, increasing operating-range coverage from 31.5% to 50.5% in a single binary set. HSC operation enables flexibility in deep part-load charging; the operating-range coverage rises from 33.8% to 55.1% in a single ternary set and to 89% in two ternary sets compared with 42.3% without HSC. HSC system efficiency is much lower due to counter-acting power flows and can reach zero even while the individual component efficiencies remain high. Ragone plot analysis is used to quantify the energy capacity at different power levels and shows that high-power HSC charging is prematurely terminated by turbine flow constraints. Advanced flexibility combinations of variable speed and HSC demonstrate potential since their characteristics complement each other, increasing the operating range from 42.2% to 71.8% in the single binary machine set configuration.
KW - Efficiency
KW - Energy-power relations
KW - Hydraulic short circuit
KW - Off-design performance
KW - Pumped hydro energy storage
KW - Variable speed
UR - http://www.scopus.com/inward/record.url?scp=105027150093&partnerID=8YFLogxK
U2 - 10.1016/j.ecmx.2025.101473
DO - 10.1016/j.ecmx.2025.101473
M3 - Article
AN - SCOPUS:105027150093
VL - 29
JO - Energy Conversion and Management: X
JF - Energy Conversion and Management: X
SN - 2590-1745
M1 - 101473
ER -