A High Q, Quasi-Monolithic Optomechanical Inertial Sensor

Publikation: KonferenzbeitragPaperForschungPeer-Review

Autorschaft

  • Jonathan Carter
  • Sina Kohlenbeck
  • Pascal Birckigt
  • Ramona Eberhardt
  • Gerhard Heinzel
  • Oliver Gerberding

Externe Organisationen

  • Max-Planck-Institut für Gravitationsphysik (Albert-Einstein-Institut)
  • Fraunhofer-Institut für Angewandte Optik und Feinmechanik IOF
  • Universität Hamburg
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
PublikationsstatusVeröffentlicht - 2020
Veranstaltung7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020 - Hiroshima, Japan
Dauer: 23 März 202026 März 2020

Konferenz

Konferenz7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020
Land/GebietJapan
OrtHiroshima
Zeitraum23 März 202026 März 2020

Abstract

In order to achieve the excellent seismic isolation necessary for the operation of gravitational wave detectors, very sensitive inertial sensors are required to measure and counteract the motion of the ground. This paper presents work on a lightweight, compact, and vacuum compatible inertial sensor based on an optomechanical design. It aims to achieve comparable noise performance to the sensors used in current gravitational wave detectors across the frequency region used for seismic isolation control, from 0.1 to 100 Hz. The quasi monolithic design of the device, along with initial measurements of the device quality factor of 28000 and the design philosophy underpinning it, are presented.

ASJC Scopus Sachgebiete

Zitieren

A High Q, Quasi-Monolithic Optomechanical Inertial Sensor. / Carter, Jonathan; Kohlenbeck, Sina; Birckigt, Pascal et al.
2020. Beitrag in 7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020, Hiroshima, Japan.

Publikation: KonferenzbeitragPaperForschungPeer-Review

Carter, J, Kohlenbeck, S, Birckigt, P, Eberhardt, R, Heinzel, G & Gerberding, O 2020, 'A High Q, Quasi-Monolithic Optomechanical Inertial Sensor', Beitrag in 7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020, Hiroshima, Japan, 23 März 2020 - 26 März 2020. https://doi.org/10.1109/INERTIAL48129.2020.9090085
Carter, J., Kohlenbeck, S., Birckigt, P., Eberhardt, R., Heinzel, G., & Gerberding, O. (2020). A High Q, Quasi-Monolithic Optomechanical Inertial Sensor. Beitrag in 7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020, Hiroshima, Japan. https://doi.org/10.1109/INERTIAL48129.2020.9090085
Carter J, Kohlenbeck S, Birckigt P, Eberhardt R, Heinzel G, Gerberding O. A High Q, Quasi-Monolithic Optomechanical Inertial Sensor. 2020. Beitrag in 7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020, Hiroshima, Japan. doi: 10.1109/INERTIAL48129.2020.9090085
Carter, Jonathan ; Kohlenbeck, Sina ; Birckigt, Pascal et al. / A High Q, Quasi-Monolithic Optomechanical Inertial Sensor. Beitrag in 7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020, Hiroshima, Japan.
Download
@conference{bd19487507964c6389d7fb2dfaa39606,
title = "A High Q, Quasi-Monolithic Optomechanical Inertial Sensor",
abstract = "In order to achieve the excellent seismic isolation necessary for the operation of gravitational wave detectors, very sensitive inertial sensors are required to measure and counteract the motion of the ground. This paper presents work on a lightweight, compact, and vacuum compatible inertial sensor based on an optomechanical design. It aims to achieve comparable noise performance to the sensors used in current gravitational wave detectors across the frequency region used for seismic isolation control, from 0.1 to 100 Hz. The quasi monolithic design of the device, along with initial measurements of the device quality factor of 28000 and the design philosophy underpinning it, are presented.",
author = "Jonathan Carter and Sina Kohlenbeck and Pascal Birckigt and Ramona Eberhardt and Gerhard Heinzel and Oliver Gerberding",
note = "Funding information: ACKNOWLEDGEMENT The authors would like to thank Felipe Guzman and Jon R. Pratt for useful discussions and acknowledge funding through the Max Planck Society and Fraunhofer Gesellschaft cooperation project High-QG.; 7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020 ; Conference date: 23-03-2020 Through 26-03-2020",
year = "2020",
doi = "10.1109/INERTIAL48129.2020.9090085",
language = "English",

}

Download

TY - CONF

T1 - A High Q, Quasi-Monolithic Optomechanical Inertial Sensor

AU - Carter, Jonathan

AU - Kohlenbeck, Sina

AU - Birckigt, Pascal

AU - Eberhardt, Ramona

AU - Heinzel, Gerhard

AU - Gerberding, Oliver

N1 - Funding information: ACKNOWLEDGEMENT The authors would like to thank Felipe Guzman and Jon R. Pratt for useful discussions and acknowledge funding through the Max Planck Society and Fraunhofer Gesellschaft cooperation project High-QG.

PY - 2020

Y1 - 2020

N2 - In order to achieve the excellent seismic isolation necessary for the operation of gravitational wave detectors, very sensitive inertial sensors are required to measure and counteract the motion of the ground. This paper presents work on a lightweight, compact, and vacuum compatible inertial sensor based on an optomechanical design. It aims to achieve comparable noise performance to the sensors used in current gravitational wave detectors across the frequency region used for seismic isolation control, from 0.1 to 100 Hz. The quasi monolithic design of the device, along with initial measurements of the device quality factor of 28000 and the design philosophy underpinning it, are presented.

AB - In order to achieve the excellent seismic isolation necessary for the operation of gravitational wave detectors, very sensitive inertial sensors are required to measure and counteract the motion of the ground. This paper presents work on a lightweight, compact, and vacuum compatible inertial sensor based on an optomechanical design. It aims to achieve comparable noise performance to the sensors used in current gravitational wave detectors across the frequency region used for seismic isolation control, from 0.1 to 100 Hz. The quasi monolithic design of the device, along with initial measurements of the device quality factor of 28000 and the design philosophy underpinning it, are presented.

UR - http://www.scopus.com/inward/record.url?scp=85085481733&partnerID=8YFLogxK

U2 - 10.1109/INERTIAL48129.2020.9090085

DO - 10.1109/INERTIAL48129.2020.9090085

M3 - Paper

AN - SCOPUS:85085481733

T2 - 7th IEEE International Symposium on Inertial Sensors and Systems, INERTIAL 2020

Y2 - 23 March 2020 through 26 March 2020

ER -