Loading [MathJax]/extensions/tex2jax.js

Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

Publikationen

  1. 2025

  2. Elektronisch veröffentlicht (E-Pub)

    Effects of severe ausforming on hierarchical microstructural development and mechanical performance in a martensitic high-strength steel

    Vaughan, M. W., Gerstein, G., Harris, R. C., Gibbons, S. L., Barber, R. E., Maier, H. J. & Karaman, I., Sept. 2025, in: Materials Science and Engineering: A. 939, 24 S., 148337.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  3. 2024

  4. Veröffentlicht

    Microstructure and shape memory behavior of a bi-layer fabricated by NiTi deposition on NiTiCu substrate using laser powder bed fusion

    Memarian, M., Mohri, M., Leinenbach, C., Kulkarni, P. V., Ghafoori, E. & Nili-Ahmadabadi, M., Nov. 2024, in: Materials Science and Engineering: A. 916, 147309.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  5. 2023

  6. Veröffentlicht

    Influence of the grain orientation and δ-ferrite on the cyclic deformation behavior of an austenitic CrNi steel manufactured by wire and arc additive manufacturing

    Blinn, B., Hassel, T., Viebranz, V. F., Beck, T. & Maier, H. J., 12 Apr. 2023, in: Materials Science and Engineering A. 870, 144612.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  7. 2022

  8. Extern

    Effect of thermomechanical treatment and microstructure on pseudo-elastic behavior of Fe–Mn–Si–Cr–Ni-(V, C) shape memory alloy

    Mohri, M., Ferretto, I., Leinenbach, C., Kim, D., Lignos, D. G. & Ghafoori, E., 10 Okt. 2022, in: Materials Science and Engineering: A. 855, 143917.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  9. 2021

  10. Veröffentlicht

    Crack initiation of an industrial 7XXX aluminum alloy in humid air analyzed via slow strain rate testing and constant displacement testing

    Schwarzenböck, E., Wiehler, L., Heidenblut, T., Hack, T., Engel, C. & Maier, H. J., 15 Feb. 2021, in: Materials Science and Engineering A. 804, 140776.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  11. Veröffentlicht

    Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading

    Gurel, S., Yagci, M. B., Canadinc, D., Gerstein, G., Bal, B. & Maier, H., 28 Jan. 2021, in: Materials Science and Engineering A. 803, 140456.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  12. Veröffentlicht

    On the high cyclic stability of the tensile two-way shape memory effect in stress-induced martensite aged Co35Ni35Al30 single crystals

    Eftifeeva, A., Panchenko, E., Chumlyakov, Y., Yanushonite, E., Gerstein, G. & Maier, H., 2 Jan. 2021, in: Materials Science and Engineering A. 799, 140166.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  13. 2020

  14. Veröffentlicht

    Influence of Ti3Ni4 precipitates on the indentation-induced two-way shape-memory effect in Nickel-Titanium

    Laursen, C. M., Peter, N. J., Gerstein, G., Maier, H., Dehm, G. & Frick, C. P., 5 Aug. 2020, in: Materials Science and Engineering A. 792, 139373.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  15. Veröffentlicht

    Influence of incorporated nanoparticles on superelastic behavior of shape memory alloys

    L'vov, V. A., Kosogor, A., Palamarchuk, S. I., Gerstein, G. & Maier, H. J., 3 März 2020, in: Materials Science and Engineering A. 776, 139025.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  16. 2019

  17. Veröffentlicht

    Compressive shape memory actuation response of stress-induced martensite aged Ni 51 Fe 18 Ga 27 Co 4 single crystals

    Panchenko, E. Y., Timofeeva, E. E., Chumlyakov, Y. I., Osipovich, K. S., Tagiltsev, A. I., Gerstein, G. & Maier, H. J., 11 Feb. 2019, in: Materials Science and Engineering A. 746, S. 448-455 8 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  18. 2017

  19. Veröffentlicht

    Two-way shape memory effect under multi-cycles in [001]-oriented Ni49Fe18Ga27Co6 single crystal

    Panchenko, E. Y., Timofeeva, E. E., Larchenkova, N. G., Chumlyakov, Y. I., Tagiltsev, A. I., Maier, H. J. & Gerstein, G., 18 Sept. 2017, in: Materials Science and Engineering A. 706, S. 95-103 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  20. Veröffentlicht

    Microstructure and mechanical properties of friction welded steel-aluminum hybrid components after T6 heat treatment

    Herbst, S., Aengeneyndt, H., Maier, H. J. & Nürnberger, F., 14 Apr. 2017, in: Materials Science and Engineering A. 696, S. 33-41 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  21. 2016

  22. Veröffentlicht

    Effect of indentation temperature on nickel-titanium indentation-induced two-way shape-memory surfaces

    Brinckmann, S. A., Frensemeier, M., Laursen, C. M., Maier, H. J., Britz, D., Mücklich, F., Frick, C. P. & Schneider, A. S., 15 Okt. 2016, in: Materials Science and Engineering A. 675, S. 253-261 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  23. Veröffentlicht

    Prediction of fracture toughness in ductile-to-brittle transition region using combined CDM and Beremin models

    Moattari, M., Sattari-Far, I., Persechino, I. & Bonora, N., 7 März 2016, in: Materials Science and Engineering A. 657, S. 161-172 12 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  24. 2015

  25. Veröffentlicht

    Twinning activities in high-Mn austenitic steels under high-velocity compressive loading

    Gumus, B., Bal, B., Gerstein, G., Canadinc, D., Maier, H. J., Guner, F. & Elmadagli, M., 12 Sept. 2015, in: Materials Science and Engineering A. 648, S. 104-112 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  26. Veröffentlicht

    One-way and two-way shape memory effect in ferromagnetic NiFeGaCo single crystals

    Timofeeva, E. E., Panchenko, E. Y., Chumlyakov, Y. I., Vetoshkina, N. G. & Maier, H. J., 9 Juli 2015, in: Materials Science and Engineering A. 640, S. 465-470 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  27. Veröffentlicht

    On the micro-deformation mechanisms active in high-manganese austenitic steels under impact loading

    Bal, B., Gumus, B., Gerstein, G., Canadinc, D. & Maier, H. J., 27 Feb. 2015, in: Materials Science and Engineering A. 632, S. 29-34 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  28. Veröffentlicht

    Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy

    Karaca, H. E., Acar, E., Ded, G. S., Saghaian, S. M., Basaran, B., Tobe, H., Kok, M., Maier, H. J., Noebe, R. D. & Chumlyakov, Y. I., 6 Jan. 2015, in: Materials Science and Engineering A. 627, S. 82-94 13 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  29. 2014

  30. Veröffentlicht

    Functional and structural fatigue of titanium tantalum high temperature shape memory alloys (HT SMAs)

    Niendorf, T., Krooß, P., Batyrsina, E., Paulsen, A., Motemani, Y., Ludwig, A., Buenconsejo, P., Frenzel, J., Eggeler, G. & Maier, H. J., 22 Okt. 2014, in: Materials Science and Engineering A. 620, S. 359-366 8 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  31. Veröffentlicht

    Improvement of formability of ultrafine-grained materials by post-SPD annealing

    Saray, O., Purcek, G., Karaman, I. & Maier, H. J., 16 Sept. 2014, in: Materials Science and Engineering A. 619, S. 119-128 10 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  32. Veröffentlicht

    Microstructure and mechanical response of single-crystalline high-manganese austenitic steels under high-pressure torsion: The effect of stacking-fault energy

    Astafurova, E. G., Tukeeva, M. S., Maier, G. G., Melnikov, E. V. & Maier, H. J., 17 März 2014, in: Materials Science and Engineering A. 604, S. 166-175 10 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  33. 2013

  34. Veröffentlicht

    On the role of slip-twin interactions on the impact behavior of high-manganese austenitic steels

    Toker, S. M., Canadinc, D., Taube, A., Gerstein, G. & Maier, H. J., 18 Nov. 2013, in: Materials Science and Engineering A. 593, S. 120-126 7 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  35. Veröffentlicht

    Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading

    Kanagarajah, P., Brenne, F., Niendorf, T. & Maier, H. J., 14 Sept. 2013, in: Materials Science and Engineering A. 588, S. 188-195 8 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  36. Veröffentlicht

    Slip transmission in bcc FeCr polycrystal

    Patriarca, L., Abuzaid, W., Sehitoglu, H. & Maier, H. J., 2 Sept. 2013, in: Materials Science and Engineering A. 588, S. 308-317 10 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  37. Veröffentlicht

    Annealing behavior of ultrafine grained structure in low-carbon steel produced by equal channel angular pressing

    Maier, G. G., Astafurova, E. G., Maier, H. J., Naydenkin, E. V., Raab, G. I., Odessky, P. D. & Dobatkin, S. V., 15 Juni 2013, in: Materials Science and Engineering A. 581, S. 104-107 4 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  38. 2012

  39. Extern

    Influence of bulk pre-straining on the size effect in nickel compression pillars

    Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 18 Aug. 2012, in: Materials Science and Engineering A. 559, S. 147-158 12 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  40. Extern

    Higher order twin modes in martensitic NiTi: The (201̄) case

    Ezaz, T., Sehitoglu, H., Abuzaid, W. & Maier, H. J., 14 Aug. 2012, in: Materials Science and Engineering A. 558, S. 422-430 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  41. Extern

    Evolution of transformation plasticity in austenite-to-bainite phase transformation: A multi parameter problem

    Lambers, H. G., Canadinc, D. & Maier, H. J., 10 Feb. 2012, in: Materials Science and Engineering A. 541, S. 73-80 8 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  42. 2011

  43. Extern

    Severe plastic deformation of Ti74Nb26 shape memory alloys

    Ma, J., Karaman, I., Kockar, B., Maier, H. J. & Chumlyakov, Y. I., 25 Sept. 2011, in: Materials Science and Engineering A. 528, 25-26, S. 7628-7635 8 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  44. Extern

    In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting

    Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Troester, T. & Maier, H. J., 22 Juli 2011, in: Materials Science and Engineering A. 528, 27, S. 7962-7967 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  45. Extern

    Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties

    Saray, O., Purcek, G., Karaman, I., Neindorf, T. & Maier, H. J., 19 Mai 2011, in: Materials Science and Engineering A. 528, 21, S. 6573-6583 11 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  46. Extern

    On the volume change in Co-Ni-Al during pseudoelasticity

    Dilibal, S., Sehitoglu, H., Hamilton, R. F., Maier, H. J. & Chumlyakov, Y., 15 Mai 2011, in: Materials Science and Engineering A. 528, 6, S. 2875-2881 7 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  47. Extern

    A comprehensive evaluation of parameters governing the cyclic stability of ultrafine-grained FCC alloys

    Canadinc, D., Niendorf, T. & Maier, H. J., 22 Apr. 2011, in: Materials Science and Engineering A. 528, 21, S. 6345-6355 11 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  48. 2010

  49. Extern

    Fatigue crack growth-Microstructure relationships in a high-manganese austenitic TWIP steel

    Niendorf, T., Rubitschek, F., Maier, H. J., Niendorf, J., Richard, H. A. & Frehn, A., 17 Dez. 2010, in: Materials Science and Engineering A. 527, 9, S. 2412-2417 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  50. Extern

    Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium

    Purcek, G., Yapici, G. G., Karaman, I. & Maier, H. J., 13 Nov. 2010, in: Materials Science and Engineering A. 528, 6, S. 2303-2308 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  51. Extern

    Underlying mechanism of dual hysteresis in NiMnGa single crystals

    Hamilton, R. F., Dilibal, S., Sehitoglu, H. & Maier, H. J., 22 Okt. 2010, in: Materials Science and Engineering A. 528, 3, S. 1877-1881 5 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  52. Extern

    Grain boundary characterization and energetics of superalloys

    Sangid, M. D., Sehitoglu, H., Maier, H. J. & Niendorf, T., 27 Juli 2010, in: Materials Science and Engineering A. 527, 26, S. 7115-7125 11 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  53. Extern

    Characterization of grain microstructure development in the aluminum alloy EN AW-6060 during extrusion

    Kayser, T., Klusemann, B., Lambers, H. G., Maier, H. J. & Svendsen, B., 26 Juni 2010, in: Materials Science and Engineering A. 527, 24-25, S. 6568-6573 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  54. Extern

    Three-dimensional modeling of the grain boundary misorientation angle distribution based on two-dimensional experimental texture measurements

    Biyikli, E., Canadinc, D., Maier, H. J., Niendorf, T. & Top, S., 11 Juni 2010, in: Materials Science and Engineering A. 527, 21-22, S. 5604-5612 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  55. Extern

    Pre-deformation-transformation plasticity relationship during martensitic transformation

    Lambers, H. G., Tschumak, S., Maier, H. J. & Canadinc, D., 15 Jan. 2010, in: Materials Science and Engineering A. 527, 3, S. 625-633 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  56. 2009

  57. Extern

    Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion

    Purcek, G., Saray, O., Kul, O., Karaman, I., Yapici, G. G., Haouaoui, M. & Maier, H. J., 20 Aug. 2009, in: Materials Science and Engineering A. 517, 1-2, S. 97-104 8 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  58. Extern

    Monitoring the fatigue-induced damage evolution in ultrafine-grained interstitial-free steel utilizing digital image correlation

    Niendorf, T., Dadda, J., Canadinc, D., Maier, H. J. & Karaman, I., 20 Aug. 2009, in: Materials Science and Engineering A. 517, 1-2, S. 225-234 10 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  59. Extern

    Creep-fatigue interaction of the ODS superalloy PM 1000

    Ngala, W. O. & Maier, H. J., 15 Juni 2009, in: Materials Science and Engineering A. 510-511, C, S. 429-433 5 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  60. Extern

    Cyclic stability of ultrafine-grained interstitial-free steel at elevated temperatures

    Niendorf, T., Maier, H. J., Canadinc, D. & Karaman, I., 15 März 2009, in: Materials Science and Engineering A. 503, 1-2, S. 160-162 3 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  61. Extern

    The role of monotonic pre-deformation on the fatigue performance of a high-manganese austenitic TWIP steel

    Niendorf, T., Lotze, C., Canadinc, D., Frehn, A. & Maier, H. J., 15 Jan. 2009, in: Materials Science and Engineering A. 499, 1-2, S. 518-524 7 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  62. 2008

  63. Extern

    On the cyclic deformation response of ultrafine-grained Al-Mg alloys at elevated temperatures

    Canadinc, D., Maier, H. J., Gabor, P. & May, J., 25 Nov. 2008, in: Materials Science and Engineering A. 496, 1-2, S. 114-120 7 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  64. Extern

    Effect of microstructure on the fatigue of hot-rolled and cold-drawn NiTi shape memory alloys

    Gall, K., Tyber, J., Wilkesanders, G., Robertson, S. W., Ritchie, R. O. & Maier, H. J., 15 Juli 2008, in: Materials Science and Engineering A. 486, 1-2, S. 389-403 15 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  65. Extern

    On the incorporation of length scales associated with pearlitic and bainitic microstructures into a visco-plastic self-consistent model

    Canadinc, D., Sehitoglu, H., Maier, H. J. & Kurath, P., 25 Juni 2008, in: Materials Science and Engineering A. 485, 1-2, S. 258-271 14 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  66. Extern

    Orientation dependence and tension/compression asymmetry of shape memory effect and superelasticity in ferromagnetic Co40Ni33Al27, Co49Ni21Ga30 and Ni54Fe19Ga27 single crystals

    Chumlyakov, Y., Panchenko, E., Kireeva, I., Karaman, I., Sehitoglu, H., Maier, H. J., Tverdokhlebova, A. & Ovsyannikov, A., 25 Mai 2008, in: Materials Science and Engineering A. 481-482, 1-2 C, S. 95-100 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  67. 2007

  68. Extern

    The role of dense dislocation walls on the deformation response of aluminum alloyed hadfield steel polycrystals

    Canadinc, D., Sehitoglu, H. & Maier, H. J., 25 Apr. 2007, in: Materials Science and Engineering A. 454-455, S. 662-666 5 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  69. 2006

  70. Extern

    Mechanical flow anisotropy in severely deformed pure titanium

    Yapici, G. G., Karaman, I. & Maier, H. J., 25 Okt. 2006, in: Materials Science and Engineering A. 434, 1-2, S. 294-302 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  71. 2005

  72. Extern

    Cyclic stress-strain response and low-cycle fatigue damage in ultrafine grained copper

    Maier, H. J., Gabor, P. & Karaman, I., 25 Nov. 2005, in: Materials Science and Engineering A. 410-411, S. 457-461 5 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  73. Extern

    Thermal processing of polycrystalline NiTi shape memory alloys

    Frick, C. P., Ortega, A. M., Tyber, J., Maksound, A. E. M., Maier, H. J., Liu, Y. & Gall, K., 25 Sept. 2005, in: Materials Science and Engineering A. 405, 1-2, S. 34-49 16 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  74. Extern

    Mechanical and thermal stability of mechanically induced near-surface nanostructures

    Nikitin, I., Altenberger, I., Maier, H. J. & Scholtes, B., 25 Aug. 2005, in: Materials Science and Engineering A. 403, 1-2, S. 318-327 10 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  75. Extern

    Environmentally influenced microstructurally small fatigue crack growth in cast magnesium

    Gall, K., Biallas, G., Maier, H. J., Horstemeyer, M. F. & McDowell, D. L., 15 Apr. 2005, in: Materials Science and Engineering A. 396, 1-2, S. 143-154 12 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  76. 2004

  77. Veröffentlicht

    Particle image velocimetry in thermal spraying

    Bach, F. W., Möhwald, K., Rothardt, T., Prehm, J., Engl, L., Hartz, K. & Drößler, B., 10 Okt. 2004, in: Materials Science and Engineering: A. 383, 1, S. 146-152 7 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  78. 2003

  79. Extern

    Transformation and detwinning induced electrical resistance variations in NiTiCu

    Kotil, T., Sehitoglu, H., Maier, H. J. & Chumlyakov, Y. I., 25 Okt. 2003, in: Materials Science and Engineering A. 359, 1-2, S. 280-289 10 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  80. 2001

  81. Extern

    High-temperature fatigue behavior of a near-γ titanium aluminide alloy under isothermal and thermo-mechanical conditions

    Christ, H. J., Fischer, F. O. R. & Maier, H. J., Dez. 2001, in: Materials Science and Engineering A. 319-321, S. 625-630 6 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  82. 1999

  83. Extern

    The effect of strain rate on hydrogen distribution in round tensile specimens

    Krom, A. H. M., Maier, H. J., Koers, R. W. J. & Bakker, A., 1 Nov. 1999, in: Materials Science and Engineering A. 271, 1-2, S. 22-30 9 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  84. 1997

  85. Extern

    The Bauschinger effect, Masing model and the Ramberg-Osgood relation for cyclic deformation in metals

    Skelton, R. P., Maier, H. J. & Christ, H. J., 15 Nov. 1997, in: Materials Science and Engineering A. 238, 2, S. 377-390 14 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  86. Veröffentlicht

    Reaction layers in MMCs and CMCs: Structure, composition and mechanical properties

    Hähnel, A., Pippel, E., Feldhoff, A., Schneider, R. & Woltersdorf, J., Sept. 1997, in: Materials Science and Engineering A. 237, 2, S. 173-179 7 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  87. 1996

  88. Veröffentlicht

    Dielectric properties of semiconductor clusters

    Becker, J. A., Schlecht, S., Schäfer, R., Woenckhaus, J. & Hensel, F., 1996, in: Materials Science and Engineering A.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  89. Veröffentlicht

    Influence of temperature on the magnetic moments of Fe clusters in an Ag matrix

    Hohl, G., Hihara, T., Sakurai, M., Sumiyama, K., Hensel, F., Suzuki, K. & Becker, J. A., 1996, in: Materials Science and Engineering A.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  90. 1995

  91. Extern

    Effects of hydrogen on ductile fracture of a spheroidized low alloy steel

    Maier, H. J., Popp, W. & Kaesche, H., 1 Feb. 1995, in: Materials Science and Engineering A. 191, 1-2, S. 17-26 10 S.

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

  92. 1989

  93. Extern

    Plastic deformation: a major factor in hydrogen embrittlement of low alloy steel

    Maier, H. J. & Kaesche, H., Sept. 1989, in: Materials Science and Engineering A. 117, C, S. L11-L15

    Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review